Error Messages
67
Poor scanning
Inspect head
Data validation failure:
hardware defect. The
validatordetected
unexpected dark spots in
spaces or light spots in bars.
This usually indicates a poor
ribbon/media combination, a
dirty printhead, or a burned
pixel.
1. Check that paper and
ribbon are clean,
unwrinkled, and
installedcorrectly.
2. Cleanthe printhead.
3. If message reappears,
replace the printhead.
SpeedExceeds
ValidatorLimit
Print Speed is set above 6
IPS as the Power-Up
configuration with the
validator option installed. An
attemptwa sm ade to set Print
Speedabov e 6 IPS in the
QUICK SETUP menu or via
host software.
Change Print Speed in the
QUICK SETUP menu or via
host software to 6 IPS or
lesswhen using the
validator option and save
the new value as the
Power-Upconfiguration in
the CONFIG CTRL menu.
Table4. Mes sage List
Message Explanation Solution