Advanced Validator Options
5.Press + or – to scroll through the percentage values: 0% to 100%. The default is 20%.
6.Press ↵ to select the desired value.
7.Press ↓ and ↵ at the same time to lock the ↵ key, then press PAUSE to take the printer offline.
8.Press PAUSE again to put the printer online.
Scanner Settings
This option has two purposes:
•Allows the validator to upload an optimized setting for a particular printer size at power up. This will use the full scanner beam width and improve the performance and efficiency of the validator.
•Allows you to customize a special scanner setting for a specific application. The file can then be downloaded to the printer by using normal printer download procedures and must be saved as part of the power up configuration. For more information, contact the Printronix Customer Solutions Center at
To set this option when a special setting has been downloaded:
.
1. Press ..
to take the printer offline and place the printer in Menu mode.
2. If necessary, press ↓ and ↵ at the same time to unlock the ↵ key.
.
3. If necessary, press ..
until “VALIDATOR” displays.
4. Press ↓ until “Scanner Settings” displays.
5. Press + or – to scroll through the options: Default or a special file name. Default is the default.
6. Press ↵ to accept the desired value.
7. Save this configuration and set it as the
8. Recycle power for the new setting to take effect.
9. The beam may need to be moved horizontally. See “Beam Shift” on page 56.
55
