Chapter 4: AMI BIOS

4-5

Wait For 'F1' If Error
This feature forces the system to wait until the 'F1' key is pressed if an err or oc-
curs. The options are Disabled and Enabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19
at bootup and allow the drives that are attached to these host adaptors to function
as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adap-
tors will not capture Interrupt 19, and the drives attached to these adaptors will not
function as bootable devices. The options are Enabled and Disabled.
Re-try Boot
If this item is enabled, the BIOS will automat ically reboot the system from a spec i-
ed boot device after its initial boot failure. Th e options are Disabled, Legacy
Boot, and EFI Boot.

Power Conguration

Watch Dog Function
If enabled, the Watch Dog timer will allow the syste m to reboot when it is inactive
for more than 5 minutes. The options are Enable d and Disabled.
Power Button Function
This feature controls how the system shuts down when the power button is pressed.
Select 4 Seconds Override for the user to power off the system after pressing and
holding the power button for 4 seconds or longer. Select Instant Off to instantly
power off the system as soon as the user presses the power button. The options
are 4 Seconds Override and Instant Off.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for
the system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system
to resume its last power state before a power loss. The options are Power-On,
Stay-Off and Last State.
CPU Conguration
The following CPU information will be displayed:
•Type of CPU