4-18
X10SLQ/X10SLQ-L User’s Manual
PCIe/PCI/PnP Conguration
This feature allows the user to set the PCI/PnP congurations for the following items:
Above 4G Decoding
Select Enabled fo r 64-bit devices to be decoded ab ove the 4GB address space
If 64bit PCI decoding is supporte d by the system. The options are Disabled and
Enabled.
VGA Palette Snoop
Select Enabl ed to support VGA palette register snooping which will allow t he
PCI cards that do not c ontain their own VGA color palette to examine the video
cards palette and mimic it for proper c olor display. The options are Disabled and
Enabled.
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled.
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled.
Slot4 PCI-E 2.0 x4 OPROM/Slot5 PCI-E 2.0 x1 OPROM/Slot7 PCI-E 3.0 x16
OPROM
Use this feature to enable or disable PCI-Express slot Option ROM support to boot
the computer using a device installed on a slot specied by the user. The options
are Disabled, Legacy and EFI.
Launch Storage OPROM Policy
This feature controls how the system executes UEFI (Unied Extensible Firmware
Interface), and legacy storage OPROM. Select Legacy Only to boot the system
using a legacy device installed in a PCI slot. The options are Do Not Launch, UEFI
Only and Legacy Only.
Other PCI Device ROM Priority
This feature selects a PCI device OPROM to launch for system boot if this device
is not a network, mass storage, or video device. The options are UEFI Only and
Legacy Only.