Chapter 4: AMI BIOS

4-13

Gfx (Graphics) Low Power Mode
Select Enabled to use the low power mode for internal graphics devices installed
in a small form factor (SFF) computer. The options are Enabled and Disabled.Gfx
(Graphics) Low Power Mode
PCI-E Conguration
This item displays the information of the (graphics) device installed on a PCI-E
slot.
•Slot7 PCI-E 3.0 x16
Slot7 PCI-E 3.0 x16 Gen X
This feature allows the user to select PCI-E support for the device installed on
Slot7. The options are Auto, Gen1 (Generation 1), Gen 2 and Gen 3.
Detect Non-Compliance Device
Select Enabled for the AMI BIOS to automatically detect a PCI-E device that is
not compliant with the PCI-E standards. The options are Enabled and Disabled.
Program PCI-E ASPM After OpROM
PCI-E ASPM, the Active State Power Management for PCI-Express slots, is a
power management protocol used to manage power consumption of serial-link
devices installed on PCI-Exp slots during a prolonged off-peak time. If this item
is set to Enabled, PCI-E ASMP will be programmed after OpROM. If this item
is set to Disabled, the PCI-E ASPM will be programmed before OpROM. The
options are Enabled and Disabled.
Slot7 PCI-E 3.0 x 16 ASPM/Slot5 PCI-E 2.0 x1 ASPM/Slot4 PCI-E 2.0 x4
ASPM
Use this feature to set the ASPM (Active State Power Management) level for the
graphics device installed on a PCI-E slot specied by the user. The options are
Disabled, Auto, ASPM L0s, ASPM L1, and, ASPM L0sL1.
Memory Conguration
This item displays the following information on the memory modules installed
on the motherboard.
•Memory RC Version
•Memory Frequency
•Total Memory