SUPER MICRO Computer X8ST3-F B-2 Installing the Windows OS for Systems without RAID Functions

X8ST3-F/X8STE User's Manual Guide

10.After the Windows XP/2003 OS Installation is completed, the system will auto- matically reboot.

B-2 Installing the Windows OS for Systems without RAID Functions

1.Insert Microsoft's Windows XP/2003 Setup CD in the CD Driver, and the system will start booting up from CD.

2.Press the <F6> key when the message-" Press F6 if you need to install a third party SCSI or RAID driver" displays.

3.When the Windows XP/2003 Setup screen appears, press "S" to specify ad- ditional device(s).

4.Insert the driver diskette-"ITE RAID XP/2003 Driver for IDE" into Drive A: and press the <Enter> key.

5.Press the <Enter> key to proceed with the installation process. (If you need to specify any additional devices to be installed, do it at this time.) Once all devices are specified, press the <Enter> key to continue with the installation.

6.From the Windows XP/2003 Setup screen, press the <Enter> key. The

XP/2003 Setup will automatically load all device files and then continue with the Windows XP/2003 installation.

7.After the Windows XP/2003 OS Installation is completed, the system will auto- matically reboot.

8.Insert the Supermicro Setup CD that came with your motherboard into the CD Drive during system boot, and the main screen shown on Page C-1 in Ap- pendix C will display. Follow the instructions given in Appendix C to complete software installation.

B-2