Superior VFGL-18MSP-4 SERIES* dimensions Optional Equipment, Remote Control Kits, Damper Clamp Kit

Models: VFGL-24MSN-4 SERIES* VFGL-24VSP-4 SERIES VFGL-18VSN-4 SERIES VFGL-28VSN-4 SERIES VFGL-28MSP-4 SERIES* VFGL-18VSP-4 SERIES VFGL-28MSN-4 SERIES* VFGL-24VSN-4 SERIES VFGL-24MSP-4 SERIES* VFGL-18MSN-4 SERIES* VFGL-18MSP-4 SERIES* VFGL-28VSP-4 SERIES

1 20
Download 20 pages 32.39 Kb
Page 9
Image 9
OPTIONAL EQUIPMENT

OPTIONAL EQUIPMENT

All options are available in kit form, are easy to install and are packaged complete with all re- quired parts and instructions. Some of the option kits need to be fitted prior to completing the installation of the appliance. The following paragraphs detail the kit options available.

The appliances covered in this manual are heater rated and produce a great deal of heat. Decorative brass trim pieces and hoods may tarnish because of their proximity to the heater opening and front face. Tarnishing of these pieces is normal, unavoidable and should be expected.

Remote Control Kits

Models RCL and RCL-STAT add the conve- nience of remote control for your appliance. The kits include a wireless, hand held trans- mitter and a receiver. This special receiver permits either manual or remote control modes. Both receiver and transmitter operate on standard 9 volt batteries (not included). Refer to the RCL and RCL-STAT installation instructions for specific details.

Damper Clamp Kit

A Damper Clamp Kit is available for use when required by local codes. Using the damper clamp to fix open the fireplace damper will allow this vent free product to be utilized as a vented decorative gas log set, (see details on pages 3 and 4).

Wall Switch Kit*

An optional wall switch kit can be installed along with all vent-free appliances. The kit consists of a standard UL wall switch with cover plate. This kit provides for remote (wall) operation of the appliance. Replace the wall switch and cover plate of this kit with the components of the FWSK and you can have true remote control of your vent-free appliance, turning it on and off from your favorite easy chair. The wall switch kit should be installed along with the appliance.

Wall Thermostat Kit*

A wall thermostat kit is available for use with these appliances. The wall thermostat is de- signed to be wired directly to the appliance millivolt gas control circuit and provide auto- matic On/Off control of the appliance to main- tain a desired temperature within the room.

Decorative Volcanic Stone

The decorative volcanic stone, Model FDVS, can be used to enhance the look of your appli- ance. Spread the decorative volcanic stone evenly around the bottom of the firebox.

Adjustable Canopy

An attractive black canopy kit is available for use with these VF appliances. The canopy kit is designed to be fitted to the wall above the firebox opening. In addition to providing an aesthetically pleasing appearance, the canopy reduces heat effects to decorative mantles and finish materials located directly above the fire- place opening. The canopy kit includes the necessary attaching hardware.

*Use 18GA, solid two conductor wire to connect these kits to the appliance.

ACCESSORIES

Remote Control Kit (Standard)

P/N H0249

RCL

Remote Control Kit (Deluxe)

P/N H0251 RCL-STAT

NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE.

Damper Clamp

P/N 110701

DCK

Thermostat

P/N 064248

WTK

Wall Switch Kit

P/N 064035

FWSK

Decorative

 

 

Volcanic Stone

P/N 110791

FDVS

Adjustable Canopy

 

 

Black

P/N 053752

AC - BLK

9

Page 9
Image 9
Superior VFGL-18MSP-4 SERIES* Optional Equipment, Remote Control Kits, Damper Clamp Kit, Wall Switch Kit, Accessories