SVAT Electronics 2.4 GHz Wireless B/W Security System manual Setting Up-Camera, Power Supply

Setting Up-Camera

1 Power Supply

The camera uses either batteries (AA-size) or household AC current.

To Load Batteries

1Open the battery compartment cover.

2 Insert batteries so their plus (+) and minus (-) ends are

facing as shown in the illustration.

3 Close the battery compartment cover. Make sure the battery compartment cover is locked securely.

Never mix old batteries with new ones.

Remove batteries from the camera if you do not plan to use it for a period of time.

Using AC Power

Plug one end of the provided power adapter into a wall outlet and the other end into the rear of the camera. Note: Use the adapter labeled OUTPUT: 9V DC.

Slide the POWER Switch to the ON position. The LED on the back of the camera should light.

7