Troubleshooting
If you are not getting any signal at all
•Check the power on the camera and monitor
•Make sure power plugs are pushed all the way in
•Check the CHANNEL switches on both camera and monitor are set to the same number
•If the camera/monitor is powered by batteries, replace all batteries with new ones
•If you can receive sound, but don't have images, or the images are poor, check the SCREEN ON/ OFF button on the front panel, or adjust the
If the signal is poor, or there is interference
•Adjust antenna orientation
•Change the channel settings on both camera and monitor and make them the same
•If there is a microwave oven in use in the path between the camera and monitor, remove the microwave oven or turn it off
•Make sure the camera and monitor are within range (up to 300 feet)
•Check the channel dipswitch positions on the monitor.
15
