INSTALLATION
1. Hard Disk installation
The system supports Dual Hard Disk recording feature. Please carefully follow the steps as below to install Hard Disk Driver. Install the Hard Disk into mobile rack
1. Take out the | 2. Take off the | 3. If you decide to use two |
mobile rack. | top cover | Hard Disks in the colour |
|
| mintor with the DVR system. |
|
| you have to designate one |
|
| as a master and the other |
|
| as a slave. |
4. Connect the cable | 5. Screw the hard | 6. Close the top cover and |
and power cord. | disk on. | insert the mobile rack to |
|
| colour monitor with DVR. |
When the Hard Disk is installed, you have to lock the mobile rack so that the DVR system can work.
Replace the Hard Disk from DVR
1.Press STOP button to stop recording.
2.Turn off the power of DVR.
3.Take out the Hard Disk from mobile rack and/or fixed hard disk rack.
4.Insert the new Hard Disk.
5.Lock the mobile rack again.
6.Turn on the power of mobile rack.
7.Press REC button for recording.
SENSOR & ALARM INSTALLATION
When you want to install the sensor and/or alarm to the DVR, please refer to the following picture for installation.
1. Sensor
Connect the wire one end to sensor and the other end to the sensor terminal. The adapter has to be inserted to the sensor when the wire is connected. If you don t know positive or negative while installing sensor output wire, the cross test can be done and see if it can work normally.