![](/images/new-backgrounds/1252079/2520799x1.webp)
SENSOR & ALARM INSTALLATION
2. Alarm
Connect the wire of alarm one pin to alarm terminal, the other pin of the wire connect to the DC power wire pin as the following picture showed. The other pin of adapter (power) wire connect to the alarm terminal.
VIDE O INPUT
*If the sensor or alarm you purchased is different from above instruction, please refer to the manual with the sensor/alarm.
OPERATION
The Factory has preset various functions as following list. If it can meet your usage requirement, please just follow our instructions to use the unit. If you want to change any
The default setting on MAIN MENU
| Main Menu |
> CAMERA SELECT | 1234 |
RECORD SELECT | 1234 |
RECORD MODE | EACH |
RECORD FRAMERATE | 30 |
VIDEO QUALITY | NORMAL |
RECORD SCHEDULE | Default setting 0~24 record. |
SUB MENU |
|
HARD DRIVE SETUP |
|
SENSOR SETUP
NETWORK SETUP
PRESS (< , >) THEN (SELECT)
PRESS (MENU) TO EXIT