SVAT Electronics CVDVR200 Record Frame Rate, Video Quality, Record Schedule, Sub Menu Setting

MENU SETTINGS

Record Frame Rate

1.When RECORD FRAME RATE is selected, you may choose the following recording frame rate - 30, 15, 10, 7, 5, 4, 3, 2 or 1 fps for recording.

2.The higher the record frame rate is, the more natural the look will be displayed on the screen when you playback. The lower the record frame rate is, the more the capacity you can save on the hard disk driver.

Video Quality

When VIDEO QUALITY is selected, there are three different video quality LOW, NORMAL or HIGH resolution for your setting.

The higher the video quality is, the more clear the image is when you playback. The lower the video quality is, the more the capacity you can save on the hard disk driver.

Record Schedule

You can change recording schedule during a day (24 hours period) by using this option. If the sensor device is attached to the DVR, it will add additional function to your recording.

1.Use SELECT button to change the record mode.

2.You may choose T for non-stop automatic recording.

3.The selection, S is for sensor recording. It means that DVR starts recording only when sensor device is attached to the DVR and receive motion signal.

4.The selection, - , means nothing will be recorded during this period.

5.Press MENU button to return to the full Menu page.

Sub Menu Setting:

(When you select SUB MENU , the screen will display SUB MENU page.)

	SUB MENU
> PASSWORD CHANGE	(Default setting 111111)
TIME SET	2003/01/01 01:01:00
FULL SCREEN BY SENSOR	OFF
SEQUENT VIEW TIME	OFF

PRESS (< , >) THEN (SELECT)

PRESS (MENU) TO EXIT

Password Change

1.When you select PASSWORD CHANGE , a password input menu will replace the Sub Menu . (Initial Password: 111111)

2.You will, then, be asked to input the following information: CURRENT PASSWORD: ------

NEW PASSWORD: ------

PASSWORD CONFIRM: ------

3.You can use the view control button on the front panel to input the number:

is 1, is 2, is 3, is 4, is 5.