First-time setup
Set up the computer
To set up the computer, you will
1. Insert the battery into the computer.
2. Connect the computer to external power.
✎The battery begins to charge.
3. Turn on the computer.
4. Set up the software.
5. Create recovery discs (recommended).
✎Refer to Appendix C, “Backup and recovery,” for
instructions.
ÄCAUTION: To prevent file corruption and to ensure that the correct drivers
are installed:
■�Do not set up the computer for the first time while the computer is
docked in an optional docking device.
■�During the hardware and software setup procedures:
❏�Do not unplug the computer from external power.
❏�Do not shut down the computer or initiate standby or
hibernation.
Getting Started�1–3