Setting / Changing the Camera Channel
The Wireless OutdoorCam operates in the 2.4GHz frequency range. It is capable of transmitting on 4 channels. Follow the steps below to set or change the fre- quency channel of the camera.
1 Pull open the rubber flap on the camera’s power cable
2 Locate the 2 dip switches under the rubber flap
Use the Dip Switch Tool to flip
3 the switches to change the camera’s transmitting channel
Set the camera channel as per the switch configuration below. Do
4 not set multiple cameras on the same channel or interference will appear on screen
Channel 1 Channel 2 Channel 3 Channel 4
1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 |
7