Selecting Channels on the Receiver
Turning Channels ON or OFF
The Wireless Receiver is capable of receiving up to 4 separate channels. To turn on channels move the dip switches on the receiver down to the ON position.
In the example below the receiver shows channel 1 is ON. No other channel will appear other than Channel 1. Cameras will only appear on channels in the ON position.
To activate channels move the channel switch down to the ON position
1 2 3 4 L
If switches are up, they are set to OFF and cameras will not appear on screen
ON
Switching Between Active Channels
The front of the Wireless Receiver has 4 LEDs representing the 4 channels of the receiver. When lit, the LED will indicate which channel is currently being displayed. In the diagram below CH1 is lit up indicating Channel 1 will display on screen.
The Wireless Receiver allows you to manually switch between active channels by pushing the SET button.
Note: The Wireless Receiver will only switch between active channels that have been be set to the ON position as described above.
The SET button will manually switch between active channels
The Receiver has 4 lights indicating the 4 channels of the Receiver
8
