User Manual

Chapter 4: Starting the DVR

4.1 Detecting Installed Hard Drive

Checking HDD ……

MASTER…

After connecting the power, the system will boot-up and detect the installed hard drive.

On the screen it will show the hard drive information. If no hard drive is detected, check that the HDD is set to master and the tray is locked.

4.2 Recovering Lost Data

RECOVER HDD?

04811-101735

(SELECT)YES/(MENU)NO

A power failure can cause data to be lost,

however the DVR system will automatically

recover lost data after power is reconnected.

4.3 Restore Recording Feature

Power Error Detected

Restore Hard Disk (Master) OK

Restore REC Mode………… OK

If a power error occurs during recording process, the system will automatically resume recording after power is reconnected.

- 4 -

Page 7
Image 7
Swann SW244-DAO manual Starting the DVR, Detecting Installed Hard Drive, Recovering Lost Data, Restore Recording Feature