User Manual
MAIN MENU |
|
CAMERA SELECT | 1 2 3 4 |
RECORD SELECT | 1 2 3 4 |
RESOLUTION | EACH |
RECORD FRAME | 25 |
RECORD QUALITY | HIGH |
SCHEDULE SET |
|
MISCELLANEOUS MENU |
|
HARD DISK SET | PAL |
VIDEO MODE | |
MOTION SET |
|
FACTORY RESET |
|
PRESS (UP，DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
5.2 Camera Select
[
Menu]: Push to enter system menu
[
Up] and [ Down]: Move the cursor
[
SEL]: Select/modify settings
[
Menu]: Press exit/previous menu
The DVR system can display 4 cameras at once or you can limit the number of cameras displayed to save HDD space.
Press [
SEL] to modify setting, or press [CH1], [CH2], [CH3] and [CH4] to set each channel separately.
If a channel is disabled, the system will display “OFF” on the monitor; this channel will not be recorded. (Refer to 5.3 Record Select)
5.3 Record Select
Manually set which channels are allowed to record.
Note: If no channels are selected, an error message will appear briefly on the screen when record is selected. “1234” indicates all cameras are set to record.
- 6 -
