Swim'n Play side deck manual Before assembling your pool, drill the

11			Before assembling your pool, drill the
			required holes in the Verticals and
			Buttress post.
		7-1/8”
	7¾”

Simply place the bracket 7¾” from the top of the Vertical or 7-1/8” from the top of theButtress post. Then, using the Post Bracket as a template, drill through the Vertical using a 5/16” drill bit.

If your pool is filled with water it will be necessary for you to lower the water level to 2’ deep in order to safely drill these holes and attach the Fence Post Brackets.

12 Take the Verticals and attach two Fence Post Brackets to each Vertical using the 1/4 x 20 x 3/4” Screws and Washers and Hex Nuts provided as shown.

You may now assemble your pool.	FENCE POST
	BRACKETS
	(2 Pieces)

HEX

NUT

WASHER

1/4" TRUSS	VERTICAL
HEAD SCREW

13 Assemble the Square Fence Post to the Post Bracket using the ¼” x 20 x 2” Screws and Hex Nuts as shown at right. If your pool is equipped with Full-Contoured Covers like those below, you must first assemble the covers to the pool before attaching the Posts.

13