Manuals / Swim'n Play / Lawn and Garden / Swimming Pool

Swim'n Play side deck manual POSITION THE REMAINING 4’X5’ PATIOS, CLOSE-UP #3

Models: side deck

1 16

Download 16 pages 1.83 Kb

Page 6

4 POSITION THE REMAINING 4’X5’ PATIOS

4 POSITION THE REMAINING 4’X5’ PATIOS

Take the next 4’x5’ patio and position it next to the previous patio. Place the ledge section of the patio over the top plates.

Attach one long post to the back side corner using the 2” screws and hex nuts as shown. Fasten the deck sections together using the 1” Truss Head screws, Washers, and hex nuts as shown. Only hand tighten the screws at this time.

Repeat this process for all 4’x5’ Patios.

HEX

NUTS

CLOSE-UP #3

2” SCREWS

LONG POST

WASHERS

HEX NUTS

1” SCREW

6

Image 6

Swim'n Play side deck manual POSITION THE REMAINING 4’X5’ PATIOS, CLOSE-UP #3

Contents

DANGER ASSEMBLY INSTRUCTIONSSIDE DECKS ADULT SUPERVISION REQUIREDLOCAL CODES CONTRACT INSTALLATIONSGENERAL BARRIER REQUIREMENTSUse the drawings below for reference while assembling your deck ASSEMBLY DRAWINGSLEVEL GROUND 2 ASSEMBLE FENCE POST BRACKETS ON DECK SIDESIZE 3 POSITION YOUR FIRST DECK SECTION CLOSE-UP #3CLOSE-UP #1 4 POSITION THE REMAINING 4’X5’ PATIOS CLOSE-UP #3CLOSE UP #2b POSITION THE 18”X 5’ LEFT AND RIGHT PATIOSASSEMBLED DECK DRAWING CLOSE UP #2aATTACH THE LADDER POST BOTTOM SUPPORT CHANNELSCLOSE UP #11 7b ATTACH BOTTOM SUPPORT CHANNELS ANGLE SUPPORT BARCLOSE UP #10 CLOSE UP #12ANGLE SUPPORT BARS TO DECK CLOSE UP #11CLOSE UP #12 10 DECK LEDGES 9 3” SPECIAL POSTS /CHECK YOUR WORK AND TIGHTENGENERAL ASSEMBLY ILLUSTRATION Before assembling your pool, drill the Fence Posts as described on the following pages 1/2 Sheet Metal Screw STANDARD POST FENCE BRAKET INSERTED THROUGH POSTRuber Cap VIEWED FROM OUTSIDE OF POOLMETAL SCREWWARNING Make sure that your pool is not accessible when not in use WARNING LABELS