Sylvania 6309CE To Change Clock Setting, Automatic Clock Setting, Auto Clock CH Search

5 Select the year	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY			YEAR
ton until your desired year appears.	0 5	/ 0 6	THU	2 0 0 4
(Example: 2004)	HOUR	MINUTE
Then, press the F.FWD/B button.	– –	: – –	– –
6 Select the hour	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY			YEAR
ton until your desired hour appears.	0 5	/ 0 6	THU	2 0 0 4
(Example: 5, PM)	HOUR	MINUTE
Then, press the F.FWD/B button.	0 5	: – –	PM

system connection using the ANT. terminal on the rear of the TV/VCR.

NOTE:

•If a cable converter box is being used, make sure it is powered on.

•You must use the TV/VCR remote control to per- form the clock setting procedure.

•If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually chan- nel 3 or 4), to be able to set up or correct the clock automatically.

7 Select the minute	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY		YEAR
ton until the desired minute	0 5	/ 0 6	THU 2 0 0 4
appears. (Example: 40)	HOUR	MINUTE
	0 5	: 4 0	PM

8 Start the clock

Press the MENU button on the

5:40 PM

remote control.

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to select “SETTING CLOCK”. Press the F.FWD/B button to enter “SETTING CLOCK” menu.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN

TIME SEARCH

Although seconds are not dis- played, they begin counting from

00 when you press the MENU but- ton on the remote control. Use this

feature to synchronize the clock with the correct time.

2 Set “AUTO CLOCK” to [ON]	– SETTING CLOCK –
Press the F.FWD/B button until	B AUTO CLOCK	[ON]
“AUTO CLOCK [ON]” appears.	AUTO CLOCK CH SEARCH
	MANUAL CLOCK SET	[ 02 ]
	AUTO CLOCK CH
	D.S.T.	[OFF]

NOTE:

When unplugging the AC cord or if there is a power

3Begin “AUTO CLOCK CH SEARCH”

Press the STOP/L button to select

failure for more than 3 seconds, you may have to reset the clock.

“AUTO CLOCK CH SEARCH”.

– SETTING CLOCK –

TO CHANGE CLOCK SETTING

If you want to change the clock, 1)Follow steps [1] and [2].

2)Select where you want to change using the

Press the F.FWD/B button.

•The TV/VCR is now searching for the station which contain the auto clock set signal. The search for a signal may take up to 20 seconds per channel.

AUTO CLOCK [ON]

BAUTO CLOCK CH SEARCH

AUTO CLOCK CH	[ 02 ]
MANUAL CLOCK SET
D.S.T.	[OFF]

– AUTO CLOCK CH SEARCH –

08 10 13

F.FWD/B or REW/s button.

3)Enter correct numbers using the PLAY/K or STOP/L button.

4)Press the MENU button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.

AUTOMATIC CLOCK SETTING

Make sure ...

•The TV/VCR is turned on.

•Confirm the TV/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable

•“_ _” appears at the lower left of the screen when the search has

ended._ _

•Auto Clock station- write down

the number(s) that appear on the screen. These are the auto clock station(s) in your area. See step [4] on the next page.

•If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 11.

Press the MENU button to exit the screen. NOTE: During Auto Clock CH Search, the picture may be distorted. This is normal.

- 12 - EN

9J27