SPECIAL PLAYBACK
Make sure ...
•TV/VCR power must be turned on.
•Insert a prerecorded tape.
•Before playback, follow steps below.
RENTAL PLAYBACK
This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.
AUTO REPEAT PLAYBACK
The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button.
ALL REPEAT: Repeat playback from the beginning to the end of the tape.
BLANK REPEAT: Repeat playback from the begin- ning to a blank part, which is blank for more than 10 seconds.
1Select “USER’S SET UP”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L but- ton to point to “USER’S SET UP”. Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP
BUSER’S SET UP
TIME SEARCH
1Select “USER’S SET UP”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L but- ton to point to “USER’S SET UP”. Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP
BUSER’S SET UP
TIME SEARCH
2 Set “RENTAL” to [ON] | – USER’S SET UP – | |
Press the PLAY/K or STOP/L but- |
|
|
ton to point to “RENTAL”. | B RENTAL | [ON] |
REPEAT PLAY | [OFF] | |
| AUTO RETURN | [OFF] |
Press the F.FWD/B or REW/s button until [ON] appears.
3Exit the Rental setting
Press the MENU button on the remote control to return to the TV mode.
4Start playback
Press the PLAY button to start playback. “RENTAL PLAY B” appears.
•Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR.
TO CANCEL THE RENTAL MODE
Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode.
If there is a power failure of any kind, the unit will retain its memory for this feature.
2 Select “ALL” or “BLANK”
Press the PLAY/K or STOP/L but-
– USER’S SET UP –
ton to point to “REPEAT PLAY”.
Press the F.FWD/B or REW/s | RENTAL | [OFF] |
B REPEAT PLAY | [ALL] | |
button repeatedly until your desired | AUTO RETURN | [OFF] |
|
| |
selection [ALL] or [BLANK] |
|
|
appears. |
|
|
3Exit the Repeat Play setting
Press the MENU button on the remote control to return to the TV mode.
4Start playback
Press the PLAY button to start the Repeat Play. ”REPEAT PLAY B” appears.
•Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR.
•If the Rental mode is set [ON], the “RENTAL PLAY B” display has priority.
TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode.
If there is a power failure of any kind, the unit will retain its memory for this feature.
- 22 - | EN |
