SEARCH
Make sure ...
•TV/VCR power must be turned on.
•Insert a tape.
ZERO RETURN
This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding.
NOTE:
Zero Return WILL NOT work on a blank tape or a blank portion of a tape.
1Stop a tape at your desired point
Rewind or fast forward the tape to the beginning point at which you want to review.
2Reset the counter to 0:00:00
Press the COUNTER RESET button repeatedly.
3Begin recording or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is completed.
4To activate “ZERO RETURN” mode
Press the MENU button on the | – M E N U – |
remote control. | PICTURE CONTROL |
| TIMER PROGRAMMING |
Press the PLAY/K or STOP/L but- | SETTING CLOCK |
USER’S SET UP | |
| CHANNEL SET UP |
ton to point to “ZERO RETURN”. | |
LANGUAGE [ENGLISH] | |
| CAPTION [OFF] |
Then, press the F.FWD/B button. | B ZERO RETURN |
TIME SEARCH |
The counter will appear on the TV screen.
The tape will automatically stop when the counter returns to 0:00:00.
TIME SEARCH
The Time Search function makes it possible to quick- ly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.
NOTES:
•Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.
•This function will not operate in recording mode.
•This function is not operative when a cassette tape is not inserted in the TV/VCR.
In the example below: To watch a program after 2 hour 50 minutes from the present position, in either direction.
1Insert a tape.
2Select “TIME SEARCH” mode
Press the TIME SEARCH button (with each push it will increase by 10 minute).
OR
Press the MENU button on the | – M E N U – |
TIMER PROGRAMMING | |
remote control. | PICTURE CONTROL |
CHANNEL SET UP | |
| SETTING CLOCK |
Press the PLAY/K or STOP/L but- | USER’S SET UP |
LANGUAGE [ENGLISH] | |
| |
ton to point to “TIME SEARCH”. | CAPTION [OFF] |
B TIME SEARCH | |
| ZERO RETURN |
Then, press the F.FWD/B button. |
|
|
|
3 Enter your desired time |
|
Press the PLAY/K or STOP/L but- | TIME SEARCH |
ton until your desired time appears. | 2 : 50 |
| |
(Example: “2:50” stands for 2 hours |
|
50 minutes) |
|
If you wish to cancel the Time
Search at this point, press the MENU button on the remote control.
4Begin Time Search
By pressing the REW/s or F.FWD/B button, the TV/VCR will rewind or fast forward to the specified point.
The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically.
TO CANCEL THE TIME SEARCH at this point
Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time.
- 23 - | EN |
