Sylvania 6319CD Clock SET UP Auto / Manual, To Select a Desired Channel, Manual Clock Setting

TO SELECT A DESIRED CHANNEL

You can select the desired channel by using the CHANNEL K or L button on or directly pressing the number buttons on the remote control.

Note for using the number buttons:

•When selecting cable channels which are higher than 99, press the +100 button first, then, press the last two digits. (Example: to select channel 125, first press the +100 button then press “2” and “5”).

•You must proceed single-digit channel numbers with a zero (Example: 02 ... 09).

CLOCK SET UP

(AUTO / MANUAL)

The TV/VCR clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/VCR. Then, setup auto clock correction which will periodically correct the setting if necessary. NOTE: If you cannot receive a station with time signals, auto clock setting cannot be performed. Use manual setting only.

4 Select the day	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY					YEAR
ton until your desired day appears.	0 5		/	0 6	– – – – – – –
(Example: 6th → 06)	HOUR			MINUTE
Then, press the F.FWD/B button.	– –		: – –		– –
5 Select the year	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY					YEAR
ton until your desired year appears.	0 5	/ 0 6			TUE	2 0 0 3
(Example: 2003)	HOUR			MINUTE
Then, press the F.FWD/B button.	– –		: – –		– –
6 Select the hour	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY					YEAR
ton until your desired hour appears.	0 5	/ 0 6			TUE	2 0 0 3
(Example: 5, PM)	HOUR			MINUTE
Then, press the F.FWD/B button.	0 5		: – –		PM
7 Select the minute	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY					YEAR
ton until the desired minute	0 5	/ 0 6			TUE	2 0 0 3
appears. (Example: 40)	HOUR		MINUTE
	0 5	: 4 0			PM

MANUAL CLOCK SETTING

Make sure ...

•The TV/VCR is turned on.

In the example below, the clock is to be set to:

DATE	May 6th, 2003
SETTING TIME	5:40PM

8 Start the clock 5:40 PM

Press the MENU button on the remote control.

Although seconds are not dis- played, they begin counting from

00 when you press the MENU button on the remote control. Use this feature to synchronize the clock

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

with the correct time.

NOTE:

When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

2Select “MANUAL CLOCK SET”

Press the PLAY/K or STOP/L	– SETTING CLOCK –
button to point to “MANUAL	AUTO CLOCK		[ON]
CLOCK SET”.	AUTO CLOCK CH SEARCH
	B MANUAL CLOCK SET
	AUTO CLOCK CH		[ 02 ]
Then, press the F.FWD/B button.	D.S.T.		[OFF]
3 Select the month
Press the PLAY/K or STOP/L	– MANUAL CLOCK SET –
button until your desired month	MONTH DAY		YEAR
appears. (Example: May → 05)	0 5 / – – – – – – – – –
Then, press the F.FWD/B button.	HOUR	MINUTE
	– –	: – – – –

If you want to change the clock, 1)Follow steps [1] and [2].

2)Select where you want to change using the F.FWD/B or REW/s button.

3)Enter correct numbers using the PLAY/K or STOP/L button.

4)Press the MENU button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.

- 11 - EN

9I03