Sylvania 6319CD, 6313CD Hints for Automatic Timer Recording, Auto Return, Wake UP Timer

TO CANCEL AN AUTOMATIC TIMER RECORDING

•After setting a program; 1)Press the POWER button.

2)Repeat steps [1] ~ [2] on page 21 and select a program you want to cancel.

3)Press the T-PROG. CLEAR button.

4)Press the MENU button on the remote control to return to TV mode.

•While recording is in progress; 1)Press POWER button.

2)Press the STOP/EJECT button on the TV/VCR.

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the REC indicator goes off.

2)Press the MENU button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the F.FWD/B button. The details of pro-

grams appear on the TV screen.

5)Press the MENU button on the remote control to return to TV mode.

HINTS FOR AUTOMATIC

TIMER RECORDING

2 Set “AUTO RETURN” to [ON]	– USER’S SET UP –
Press the PLAY/K or STOP/L but-	RENTAL	[OFF]
ton to point to “AUTO RETURN”.
	REPEAT PLAY	[OFF]
	B AUTO RETURN	[ON]

Press the F.FWD/B or REW/s button until [ON] appears.

3Auto Return will begin

When all the timer recordings are completed, the TV/VCR will rewind to the beginning of the recorded program(s).

NOTE:

•If you press the POWER button while tape is rewinding, the Auto Return will stop.

4Watch the recorded program

Press the PLAY button.

TO CANCEL THE AUTO RETURN MODE

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button.

If there is a power failure of any kind, the unit will retain its memory for this feature.

•Make sure the channel you want to record is prop- erly set in advance.

•It is not necessary to press the RECORD button for timer recording.

•Recording begins automatically at the Start time.

•If you are recording using a Timer mode, you may not operate the unit manually.

•The erase-prevention tab on the cassette must be in place (or you must put tape over the hole).

•If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off.

•If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediate- ly, and the tape will be ejected.

AUTO RETURN

With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically.

1 Select “USER’S SET UP” – M E N U –

WAKE UP TIMER

The Wake Up Timer function turns on the TV/VCR without using the POWER button after a desired period of time.

NOTES:

•Use the remote control for this procedure.

•Clock must be set to the correct time before setting the timer.

•If you want to select [TAPE], you must insert a cassette tape in the TV/VCR. The tape will start playback automatically on your desired time.

1Select “WAKE UP TIMER”

Press the WAKE UP/SLEEP button on the remote control once, and confirm “ON/OFF” is pointed.

Press the F.FWD/B or REW/s	WAKE UP B ON/OFF	[ON]
	TIMER TV/TAPE	[TV]
button until [ON] appears.	TIME	[12:00AM]

2Select “TV” or “TAPE”

Press the PLAY/K or STOP/L but- ton until to point to “TV/TAPE”.

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “USER’S SET UP”. Then, press the F.FWD/B button.

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP

BUSER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

Press the F.FWD/B or REW/s button, and select [TV] or [TAPE].

- 23 -

WAKE UP	ON/OFF	[ON]
TIMER	B TV/TAPE	[TV]
	TIME	[12:00AM]

EN

9I03