Stereo Sound Mode

CD

This unit allows you to select a sound mode during CD playback.

1Press [AUDIO] repeatedly until the desired sound mode appears.

STEREO

Each time you press [AUDIO], the audio language changes as example below.

STEREO (Right and left channels are active.)

L-ch(Left channel is active.)

R-ch(Right channel is active.)

NOTE:

Virtual Surround cannot be changed when the sound mode is set to either L-ch or R-ch.

-

Virtual Surround

DVD CD MP3

You can enjoy virtual surround sound on your existing 2 channel stereo system.

1During playback, press [MODE] repeatedly until the ““ appears.

OFF

2Press [ENTER] to select the sound level.

1

1: Natural effect.

2: Emphasized effect.

OFF : No effects (original sound).

3To exit the Virtual Surround setting, press [BACK/RETURN].

NOTE:

The setting will be kept even if the unit is turned off.

On Audio CDs, Virtual Surround will not be effective if the sound mode is set to something other than “STEREO”. Refer to “Stereo Sound Mode”.

Turn down the level or select “OFF” if the sound is distorted.

 

 

Marker Setup

 

INTRODUCTION

 

DVD

CD

 

This feature allows you to assign a specifi c point on a disc to be called back

 

later.

 

 

 

 

PREPARATION

1 until the “

“ appears.

To set a marker

 

 

During playback, press [SEARCH MODE] repeatedly

 

 

 

 

 

 

SETTING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Use [s / B] to select a desired marker within 30 sec-

 

onds.

 

 

 

 

TV

 

or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPERATINGTV

 

 

 

 

 

 

 

 

 

 

 

 

3 Press [ENTER] to set the marker.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 To exit the Marker setup display,

 

OPERATING

 

press [BACK/RETURN].

 

 

To return to the marker later

DVD

 

 

 

 

 

 

1 In stop mode, press [SEARCH MODE] repeatedly until

 

 

 

the “ “ appears.

SETTING DVD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Use [s / B] to select a desired marker within 30 sec-

 

onds.

 

 

 

 

TROUBLESHOOTING

 

or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 Press [ENTER] at the desired marker to restart playback

 

 

from the specific point which you set.

 

 

 

INFORMATION

 

 

 

 

 

 

 

 

 

 

 

 

 

• You can mark up to 10 points.

 

NOTE:

 

 

 

 

 

 

• The Marker display will disappear in about 30 seconds when

 

 

there is no input.

 

 

• To clear a marker, select the marker to be cleared at step 2 in

 

 

the section “To set a marker” or “To return to the marker later”,

 

 

and then press [CLEAR].

 

 

• Ejecting the disc or turning off the power will erase all markers.

ESPAÑOL

 

• Selecting “

” at step 2 in the section “To set a marker” or “To

 

 

return to the marker later” will also erase all markers.

39

EN

Page 39
Image 39
Sylvania 6626LDG owner manual Press Audio repeatedly until the desired sound mode appears, Until Appears, Onds