23
EN
WATCHING TV
OPTIONAL SETTING
OPERATING DVD
INTRODUCTION PREPARATION INITIAL SETTING DVD SETTING INFORMATION
TROUBLESHOOTING
ESPAÑOL
Playback
Before you begin:
Turn on the ampli er and any other equipment which is connected to this
unit. Make sure the external audio receiver are set to the correct input
mode.
1Press [POWER
y
] to turn on the unit.
2Press [OPEN/CLOSE A].
• The unit switches to the DVD mode when the unit
was in TV mode.
3Insert a disc with its label side facing up.
Align the disc to the
disc tray guide.
• In case the DVD was recorded on both sides, make
sure the side you want to play back is facing up.
4Press [PLAY B]. The tray will close and playback will
start.
• If playback does not start automatically, press
[PLAY B] again.
5Press [STOP C] to stop playback temporarily.
• If playback remains stopped for 5 minutes, the screen
saver program will activate automatically,
and in 15 minutes with no activity at the unit, the unit
will turn off when “AUTO POWER OFF“ is set to “ON“
(factory default).
6Press [OPEN/CLOSE A] to eject the disc.
5Note:
• “ ” may appear at the top-right on the TV
screen when the operation is prohibited by
the disc or this unit.
• Some DVD may start playback from title 2 or 3 due to specific
programs.
• During the playback of a 2-layered disc, pictures may stop for
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is not a malfunction.
DVD Menu
DVD
Some discs contain disc menus which describe the contents of the disc or
allow you to customize disc playback, or title menu which lists the titles
available on the DVD.
Press [DISC MENU] to call up the disc menu, or press
[TITLE] to call up the title menu.
Use [Cursor K / L / s / B] to select an item, then press
[ENTER] (or [PLAY B]).
Note:
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
Resume Playback
Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B]. Playback will
resume from the point at which
playback was stopped.
Note:
•
To cancel resume, press [STOP C] one more time in the stop
mode. On some discs, [STOP C] will not work while the resume
message appears. Please wait until the message disappears.
• The resume information will be kept even when unit is turned
off. However, opening the disc tray will cancel the resume fea-
ture. Playback will start at the beginning the next time you
insert the disc.
Pause
Press [PAUSE F] during playback.
• Playback will be paused and sound will be
muted.
To continue playback, press [PLAY B].
5
5
5
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Resume ON