31
EN
WATCHING TV
OPTIONAL SETTING
OPERATING DVD
INTRODUCTION PREPARATION INITIAL SETTING DVD SETTING INFORMATION
TROUBLESHOOTING
ESPAÑOL

Marker Setup

Marker Setup

This feature allows you to assign a speci c point on a disc to be called back
later.

To set a marker

1During playback, press [MODE] repeatedly until
” or “ ” appears.
e.g.) DVD
/12 (SEARCH)
2Use [Cursor K /L] repeatedly until maker search menu
appears.
e.g.) DVD
or
3Use [Cursor s / B] to select an available marker
within 60 seconds.
e.g.) DVD
or
4When the playback reaches the point at which you
want to set a marker, press [ENTER].
Marker is now set.
e.g.) DVD
5Press [RETURN] to exit.

To return to the marker later

1To select a desired marker, repeat steps 1 to 3 in
“To set a marker“ above.
e.g.) DVD
2Press [ENTER] at the desired marker to start playback
from the specific point which you set.
e.g.) DVD
Note:
• Marker search menu will disappear in about 60 seconds
when there is no input.
• You can mark up to 10 points.
• To clear a marker, select the marker to be cleared, and then
press [CLEAR].
• Ejecting the disc or turning off the power will erase all mark-
ers.
Selecting ” at step 3 in the section “To set a marker”
will also erase all markers.