CONNECTING TO A DOLBY DIGITAL DECODER
OR DTS DECODER
If using this DVD player to play back a DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and
Use audio coaxial digital cables (commercially available) for the audio connections.
A/V-compatible
or wide screen TV
To VIDEO INPUT jack | To VIDEO OUT jack |
or |
|
|
|
To | To |
| |
INPUT jack | DIGITAL AUDIO OUT | VIDEO OUT AUDIO OUT | |
PCM / BITSTREAM
2
Center
speaker
Front speaker (left)
Dolby Digital or DTS decoder
Surround
speaker (left)
1
Front speaker | COAXIAL | R L | ||||||
|
|
|
| To COAXIAL DIGITAL | ||||
|
|
|
| |||||
|
|
|
| |||||
| (right) |
|
|
|
| |||
|
|
|
|
|
|
| AUDIO OUT jack |
|
To COAXIAL DIGITAL
AUDIO INPUT jack
Surround | Subwoofer | ||||||
speaker |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(right) |
|
|
|
|
|
|
|
[Fig. 5]
Notes
●Be sure to turn off the power to all components in the system before connecting another component.
●Refer to the Owner’s Manuals for the components to be connected to the DVD player.
●If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.
●If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.
●Unless connected to a Dolby Digital decoder or a DTS decoder, set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
●When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
Manufactured under license from Dolby Labo- ratories. "Dolby" and the
DTS is a trademark of Digital Theater Systems
Inc. in the United States of America.
- 12 - | EN |
0D05
