Sylvania DVL500A owner manual You can define a section to be played back repeatedly

A-B REPEAT PROGRAM (Audio CD)

DVD CD

You can define a section to be played back repeatedly.

1Press the A-B REPEAT button during playback.

● The starting point (A) will then be REPEAT

[ A - ]

selected.

2Press the A-B REPEAT button again at the end point (B) of the desired section.

● The selected section will be played REPEAT

[ A - B ]

back repeatedly.

3To exit A-B repeat playback, press the A-B RE- PEAT button and set it to OFF.

REPEAT [ OFF ]

Notes

●If B is selected at a point which is earlier than point A, the previous setting of A is canceled and the point selected as B will become the setting for A.

●With DVDs, the A-B repeat section can be set only within the current title.

●With audio CDs, the A-B repeat section can be set across different tracks.

●A-B repeat is not available with some scenes in DVD.

CD

1Press the MODE button in stop mode.

● The program screen will appear.		PROGRAM
	T [ __ ] / 18 TOTAL 0h 00m 00s
	Start,	Delete	Exit

2Press the numeric or ▲/▼ buttons to enter the desired track numbers, and then press the EN- TER button to select the settings.

● The total playback time for the se-	T [12_ ] / 14	PROGRAM
		TOTAL 0h 27m 46s
lected tracks will appear on the	01: 02	11: 12
	03: 06	13: 10
	02: 04	12: 14
TOTAL line.	04: 09	14: 11
	06: 03
	05: 01
	07: 05
	08: 07
	09: 13
	10: 08
	Start,	Delete	Exit

3Press the PLAY button.

●Playback will start in the programmed order.

●The contents of the program are retained after the program playback ends.

Notes

●Addition or confirmation of programs is not possible during program playback. You must stop the current playback before such operations can be carried out.

●Press the CLEAR button to cancel a program. The most recently entered program will then be deleted.

●Up to 20 programs can be stored at any time.

PROGRAM

T [ __] / 14 TOTAL 0h 27m 46s

01: 09	11: 01
02: 03	12: 14
03: 04	13: 10
04: 07	14: 11
05: 01
06: 02
07: 12
08: 10
09: 13
10: 08
Start,	Delete	Exit

●Numbers which exceed the number of tracks on the disc in the tray are not accepted.

●Playback from a desired track and random playback are not available during program playback.

●Program settings are cleared when the power is turned off or the disc loading tray is opened.

●Program playback is available only with current disc.

- 17 -EN

0D05