PLAYING A DISC
PLAYING A DVD VIDEO
OR AN AUDIO CD
DVD 
CD
Getting started
Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct.)
1Press the POWER button.
●The power will turn on.
2Press the OPEN/CLOSE button.
●The disc loading tray will open.
3Press the DISC SELECT button repeatedly or the DISC Number button.
●The desired disc tray moves to the front position.
4Place a disc into the tray.
●Make sure the disc is sitting properly in the correct recess, with the label side up.
●Repeat steps 3 and 4 to load more discs.
Right side tray
Left side tray
5Press the PLAY button.
●The tray will close automatically, and playback will then start from the first chapter or track of the disc on the left side. You may need to press the PLAY button for some discs when the tray has been closed by pressing the OPEN/CLOSE button.
●If the disc has not been set on the tray, the DVD player will play the disc which is set on the right side tray.
●When you want to select the other disc, press the DISC SELECT button repeatedly or the DISC Num- ber button for your desired disc.
●When you play back the DVD which a title menu is recorded, the menu may appear on the screen. In this case, refer to "USING THE TITLE MENU".
6Press the STOP button to stop play.
Notes
●A "prohibited icon" may appear at
the bottom right on the TV screen during operation, warning that a prohibited operation has been en- countered by the DVD player or the disc.
●If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback.
●With DVDs that use some titles for playback pro- gram signals, playback may start from the second ti- tle, or it may skip these titles.
●When the DVD player has finished playing the cur- rent disc, it will go to the stop mode.
●You can not change the other disc during playback. After the DVD player is stopped, press the OPEN/CLOSE button.
USING THE DVD MENUS
DVD
Some DVDs contain their own menus, such as a guid- ance menu which describes the contents of the disc or a selection menu for sound, language and other custom- ized settings.
1Press the MENU button.
●The DVD menu will appear.
2Select the desired title.
●Press the arrow buttons (▼/▲/B/s) to change the setting, and then press the ENTER button.
3Playback will start from the selected title.
- 13 - | EN |
0D05
