Sylvania DVR90DG owner manual Before you start Connections Getting started, Español

Owner’s Manual

DVD Recorder

DVR90DG

OPEN/CLOSE	CHANNEL	REV	FWD	STOP	PLAY	POWER
REC SPEED REC/OTR
			S-VIDEO	VIDEO	L	AUDIO R

INSTRUCCIONES EN ESPAÑOL INCLUIDAS

Before you start Connections Getting started

Please read before using this equipment.

If you need additional operating assistance after reading this owner’s manual or

to order replacement accessories, please call

TOLL FREE : 1-800-605-8453

or visit our web site at http://www.SylvaniaConsumerElectronics.com

Connection to a TV

(Before you use this unit, you need to complete connections.)

If your TV has AUDIO/VIDEO input jacks, see the section “Connections” on pages 13–15. If not, it is still possible to connect this unit to your TV by using a Stereo Audio/Video RF modulator. In this case, follow the instructions below.

1)The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then connect the RF cable to the ANTENNA IN jack of this unit.

2)Connect the ANTENNA OUT jack of this unit to your RF modulator (usually marked “ANT IN”) by the RF cable.

3)Connect your RF modulator to your TV by another RF cable.

4)Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by Audio/Video cables.

5)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a Modulator/Antenna switch, set it according to your RF modulator’s manual.

6)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to. For more details, follow the instructions supplied with the RF modulator.

Recording Playing discs Editing

Cable Antenna TV signal

(Back of This Unit)

	VIDEO IN	COMPONENT
IN		VIDEO OUTPUT		VIDEO OUT
		S-VIDEO	Y
	IN	OUT
OUT	L			L
			PB/CB
	R			R
	AUDIO IN		PR/CR	AUDIO OUT
	(L1)

2	5
RF cable	Set channel 3 or 4.
(supplied)

4

Audio/Video cables (supplied)

6

Turn on your TV and select channel 3 or 4.

(Back of TV)

Setup menu	Changing the
Others

AC 120V ANT IN CHANNEL		TO TV	AUDIO IN VIDEO IN
3	4		R	L
STEREO AUDIO/VIDEO				Antenna in jack
RF Modulator			3	RF cable
(commercially available)
				(commercially available)

Note

•The quality of picture may become poor if this unit is connected to an RF modulator.

To record a program easily, refer to “Easy DVD recording” on pages 16-17 after con- nections are completed.

(You CANNOT record on any copyright protected DVD disc with this unit.)

Español