Sylvania DVR90DG owner manual Troubleshooting cont’d, Others, You press OPEN/CLOSE a, MAY not work

Others

Troubleshooting (cont’d)

Symptom

Others

The unit does not operate properly.

Remedy

•When static electricity, etc., causes the unit to operate abnormally, unplug the unit and then plug it in again.

The disc tray does not open when				• It may take a few seconds for the disc tray to open after you have
you press [OPEN/CLOSE A].				recorded or edited a disc.
“Repairing” appears on the display.				• If there is a power failure or unplugging during recording, finalizing,
				formatting or editing (even after “Wait for a moment.” message
				is disappeared), a Repairing process will begin automatically just
	Repairing		90%	after turning the unit on again.
In a case you intend to cancel the				It may take several minutes up to about four hours.
				• If you intend to cancel the Repairing process, press
Repairing process.
				[OPEN/CLOSE A] on the front panel, then select “Yes” with
				[{ / B] and press [ENTER]. After that, press [OPEN/CLOSE A]
	Do you want to cancel a repairing process ?
				to take out the disc. The disc canceled the Repairing process
	When selecting “Yes”, the disc may not be
	usable.			MAY NOT work.
	Yes	No

Repairing

90%

Error message

Cause

Solution

		• Unplayable disc is inserted in the	• Insert the standardized disc which
	Disc Error
		unit.	bear the marks on page 37.
--- Please eject the disc. ---
		• The disc is upside down.	• Insert the disc with the labeled
Playback feature may not be
			side facing up.
available on this Disc.
		• Playback is not authorized in the	• Insert the DVD-Video disc with
	Region Error
		region of the DVD-Video disc	region codes 1 or ALL.
--- Please eject the disc. ---
		which you inserted in the unit.
Playback is not authorized in your
region.
		• The current selected parental	• Check the “Parental Lock” setting
	Parental Lock On
		level in the Setup menu prohibits	(pages 70-71).
The current selected parental level
		playback.
prohibits playback.
		• The recording function	• You cannot record copy prohibited
	Recording Error
		encountered the copy prohibited	programs.
This program is not allowed to be
		program.
recorded.
		• You are trying to record the copy-	• Set “Format mode” to “VR
	Recording Error
		once program onto the DVD-RW	mode”(page 26).
This program is not recordable in
		disc in Video mode.
Video mode.
		• You are trying to record onto the	• Insert the recordable disc, and
	Recording Error
		disc which is unrecordable, or the	ensure the disc status satisfies the
Can not record on this disc.
		disc status is unable to record.	recording requirements
		• The disc is dirty.	(pages 24-25).
		• The disc is damaged.	• Clean the disc with a cleaning cloth.
			• Replace the disc.
		• You are trying to record the copy-	• Insert the DVD-RW disc in VR
	Recording Error
		once program onto the DVD-RW	mode (ver.1.1 or 1.2 compatible
This program is not allowed to be
		disc which is not compatible with	with CPRM).
recorded on this disc.
		CPRM.
		• You are trying to record on to the	• Release the disc protect setting in
	Recording Error
		protected disc which is set in the	the Disc menu (page 34).
This disc is protected and not
		Disc menu.
recordable.
		• You are trying to record onto	• Insert the recordable disc with
	Recording Error
		the disc which has no space for	enough recording space.
Disc is full.
		recording.
(No area for new recording)

74