Sylvania DVR90VG RF output switch, Before you start Connections Getting started, Panel display

Others

Troubleshooting (cont’d)

	Error message	Cause	Solution
		You are trying to record onto the disc	Delete unnecessary titles
	Recording Error
		on which the number of recording	(pages 54, 57).
You cannot record more than 99
		titles comes up to the maximum (99).
titles on one disc.
(The maximum is 99)
		You are trying to record onto the VR	This unit cannot delete the original
	Recording Error
		mode DVD-RW disc on which the	chapter. Delete unnecessary chapter
You cannot record more than
		number of recording chapters comes	marker using other DVD recorders.
999 chapters on one disc.
		up to the maximum (999).	Delete unnecessary chapter markers
(The maximum is 999)
			(page 56).
		This disc has no space to write the	Delete unnecessary titles
	Recording Error
		Control Information when recording	(pages 54, 57).
You cannot record on this disc
		or deleting contents.
as Control Information is full.
		When editing has been repeatedly
		performed, the control Information
		area may come up to be full even the
		recording area has enough space.

Before you start Connections Getting started

Recording Error

You cannot record on this disc as Power Calibration Area is full.

When recordings are performed	Insert a new disc.
repeatedly onto an unstable disc, this
area may come up to be full.
Every time you insert a disc for
recording, the disc’s working area will
be taken up. And if you repeat this
frequently, it will be used up sooner
and you may not be able to record
full 99 titles.

Recording

		You are trying to record onto	Release the finalizing for this
	Recording Error
		the disc already finalized.	disc (page 36).
This disc is already finalized.

*If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the error description, and call our helpline mentioned on the front page to locate an Authorized Service Center.

Playing discs

You can watch the TV programs with the tuner of the unit. (Usually channel 3 or 4 of the TV is available for the RF converter setting.) Be sure to connect the unit to a TV using the RF cable. Refer to page 14.

1

Select channel 3 on your TV.

2

Press [VIDEO/TV] on the remote control.

•If noise appears, change the RF output channel of the unit to CH 4 by pressing [VIDEO/TV] for 3 seconds. The RF output channel will alternate between CH3 and CH4 as follows.

RF output switch

• Each time the RF output

				channel is changed, CH3 or
POWER	T-SET		OPEN/CLOSE	CH4 will appear on the front
		TIMER PROG.		panel display.
.@/:	ABC	DEF
1	2	3
GHI	JKL	MNO	CH
4	5	6
PQRS	TUV	WXYZ	VIDEO/TV
7	8	9
DISPLAY	SPACE	CLEAR	SETUP
	0
TOP MENU MENU/LIST RETURN			ENTER

for more than

3 seconds

3 seconds

(RF on) CH4

3 seconds

(RF on) CH3

3 seconds

(RF on) CH4

3 seconds

Changing the Editing Setup menu VCR functions Others Español

EN 81