Connections

Connection to an Audio System

When you change the connections, all devices should be turned off.

Refer to the operation manual accompanying external devices for more information.

Method 1

Stereo system

AUDIO

Analog audio input jacks

Audio cable

(supplied)

Method 2

Dolby Digital decoder, MD

deck or DAT deck

COAXIAL Digital audio

input jack

Audio Coaxial Digital cable

DVD

(commercially available)

AUDIO OUT

 

DIGITAL

This unit

<REAR PANEL>

AUDIO OUT

DVD/VCR

IN - AUDIO - OUT

L

R

or

DVD

AUDIO

OUT

COAXIAL

DIGITAL

AUDIO OUT

Setting

Setup >Playback >Audio >Digital Out >

Connection

PCM

Dolby Digital

If output is Dolby Digital

L

R

Note

Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

encoded audio, connect to a - STREAM Dolby Digital decoder.

Unless connected to a Dolby

-

PCM

Digital decoder.

Connecting to an MD deck or

 

PCM

DAT deck.

-

* To complete these settings, refer to pages 71-72.

Note

By connecting this unit to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital Multi- channel surround sound as heard in the movie theaters.

The audio source on a disc in a Dolby Digital Multi- channel surround format cannot be recorded as digital sound by an MD or DAT deck.

Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

16EN

Page 18
Image 18
Sylvania DVR90VG manual Connection to an Audio System, Digital Audio OUT