Sylvania DVR90VG manual Symptom Remedy, Or Setup to, You press OPEN/CLOSE a

	Others
	Troubleshooting (cont’d)
Symptom	Remedy
There is no picture.	• The Setup Display appears. Press [RETURN	] (or [SETUP]) to
	turn off the display.

•Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV. See page 14.

	Picture noise appears.	• The disc is dirty or flawed.
		• If the picture output signal from the unit passes through your VCR
		before reaching your TV, or if you are connected to a combination
		TV/VIDEO player, the copy-protection signal applied to some DVD
		programs could affect picture quality. If you still experience this
		problem even when you connect the unit directly to your TV, try
		connecting the unit to your TV’s S-VIDEO input.
	There is no sound.	• If the audio signal does not come through the DIGITAL OUT
		(COAXIAL) jack, check the Audio settings (pages 71-72).
		• The disc is dirty or flawed.
	Sound is noisy.	• The disc is dirty or flawed.
	No DTS sound is output.	• This unit is not compatible with DTS sound.
	The unit does not play back the	• No disc is inserted.
	disc.	• A blank disc is inserted.
		• The disc is upside down. Insert the disc with the labeled side facing up.
		• The disc is not correctly inserted.
		• The unit cannot playback certain discs (such as a CD-ROM) (page 40).
		• The region code on the DVD-Video does not match the ones on the
		unit (page 40).
		• Moisture has condensed inside the unit. Remove the disc and
		leave the unit turned on for about two hours until the moisture
		evaporates (page 4).
		• If the disc was recorded on another recorder, the unit cannot play
		back the disc unless it is finalized (page 36).
D	Playback image freezes for a	• During the playback of two layered disc, picture may freeze for a
	second.	moment when the 1st layer switches to the 2nd layer. This is not a
V		malfunction.
D The disc does not start playback		• Resume play was activated (page 44). Press [STOP C] twice.
	from the beginning.	• You have inserted a disc whose Title menu or DVD menu
		automatically appears on the TV screen when it is first insert.
	The unit starts playing back the disc	• The DVD-Video features an auto playback function.
	automatically.
	Some functions such as Stop,	• Depending on the disc, you may not be able to do some of those
	Search, or Slow-motion Play	operations. See the instruction manual supplied with the disc.
	cannot be performed.
	The language for the sound track	• Multilingual tracks are not recorded on the DVD-Video, DVD-R or
	cannot be changed.	DVD-RW being played back.
		• The DVD-Video prohibits the changing of the language for the
		sound track.
		• Try changing the language using the DVD-Video’s menu.
	The subtitle language cannot be	• Multilingual subtitle are not recorded on the DVD-Video.
	changed or turned off.	• The DVD-Video prohibits changing of the subtitles.
		• Try changing the subtitles using the DVD-Video’s menu.
	The angles cannot be changed.	• Multi-angles are not recorded on the DVD-Video being played back.
		• The angle-change operation is possible as long as the disc
		contains a multi-angle portion. Actual change can be performed
		when the portion has come up.
		• The DVD-Video prohibits changing angles.
		• Try changing the angles using the DVD-Video’s menu.
	Recording does not stop immediately	• It will take a few seconds for the unit to input disc data before
	after you press [STOP C].	recording can stop.
	Recording does not start immediately	• An unused DVD-R or DVD-RW was inserted. It takes a while for
	after you press [REC/OTR] (DVD).	the unit to automatically format a DVD-RW.
	The disc tray does not open when	• It may take a few seconds for the disc tray to open after you have
	you press [OPEN/CLOSE A].	recorded or edited a disc. This is because the unit is adding disc
		data to the disc.
		EN 79

Changing the Before you start Connections Getting started Recording Playing discs Editing Setup menu VCR functions Others Español