These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

Playback

Before you begin:

Turn on the amplifier and any other equipment which is connected to this unit. Make sure the external audio receiver (not included) are set to the correct channel.

1 Press POWER to turn on the unit.2 Insert a disc with label facing forward.# CAUTION

• Do not put coins or foreign objects into the disc loading slot.

•In case the DVD was recorded on both sides, make sure the label of the side you want to play back is facing forward.

3 The unit switches to the DVD mode when the unit was in TV mode and detects the type of disc.

• Press PLAY Bif the unit does not go to the DVD mode.

4 The unit starts playback.•If playback does not start automatically, press PLAY B again.5 Press STOP Cto stop playback temporarily.

•If playback remains stopped for 20 minutes, the unit will go into standby mode automatically when

[AUTO POWER OFF] is set to [ON].6 Press AEJECT to eject the disc.

Note

•[ ] may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.

•Some DVD may start playback from title 2 or 3 due to specific programs.

•During the playback of a 2-layered disc, pictures may stop for a moment.This happens while the 1st layer is being switched to the 2nd layer.This is not a malfunction.

•When you cannot remove the disc, you may try either following operations.

-Press and hold A EJECT on the unit for more than 5 seconds.

-Unplug the AC power cord and plug it in again, then press

AEJECT.

It will take about 10 seconds to eject the disc, while that the unit will not respond to any key commands.

Disc Menu

DVD

Some discs contain disc menus which describe the contents of the disc or allow you to customize disc playback, or title menu which lists the titles available on the DVD.

 

English

 

29

 

 

 

 

To display the DVD menu, press DISC MENU and use

INTRODUCTION

 

▲/▼/◄/► to select an item, then press ENTER (or

 

PLAY B).

 

To display the top menu, press TITLE and use

 

▲/▼/◄/► to select an item, then press ENTER (or

 

PLAY B).

 

 

 

Note

 

PREPARATION

• Menu operations may vary depending on the disc.

 

Refer to the manual accompanying the disc for more details.

 

 

 

Resume Playback

 

 

Press STOP C during playback. Resume message will appear

WATCHING

playback was stopped.
on the TV screen.

 

Press PLAY B. Playback will resume from the point at which

 

 

 

 

TV

Note

 

• To cancel resume, press STOP Cone more time in the stop mode.

 

 

On some discs, STOP Cwill not work while the resume message

USING

appears. Please wait until the message disappears.

 

• The resume information will be kept even when the unit goes

FUNCTIONS

into standby mode. However, ejecting the disc will cancel the

resume feature. Playback will start at the beginning the next time

 

you insert the disc.

 

 

 

 

 

 

 

 

OPERATING

Press PAUSE F during playback.

Paused and Step-by-step Playback

 

• Playback will be paused and sound will be muted.

DVD

 

 

 

DVD

 

 

CONNECTING

To continue playback, press PLAY B.
Each time you press PAUSE F in the pause mode, the disc

 

goes forward one frame at a time.

 

 

DEVICES

• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures

Note

 

in the pause mode are blurred. ➠ p.26

 

 

USEFUL

 

 

 

Fast Forward / Fast Reverse

TIPS

 

 

 

Press FWD D or REV E repeatedly during playback to

 

select the desired forward or reverse speed.

 

INFORMATION

To continue playback, press PLAY B.

 

 

 

Note

 

• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures

 

in the fast playback mode are blurred. ➠ p.26

 

• Fast forward / fast reverse speed varies with disc. Approximate

 

 

speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x) on DVD and

 

1(2x), 2(8x) and 3(30x) on audio CD.

 

• For DVD, sound will be muted during this function.

 

• For audio CD, sound will be intermittent during the search.