Sylvania LD320SS2 Camera Angles, Black Level Setting, Stereo Sound Mode, Virtual Surround, Marker Setup

Note

•Some discs will only allow you to change the audio setting from the disc menu. Refer to the manual accompanying the discs for details.

•If your language is not shown after pressing AUDIO several times, the disc may not have that language.

However, some discs allow you to change multiple audio languages setting in the disc menu. (Operation varies depending on the disc, so refer to the manual along with the disc.)

•When [NOT AVAILABLE] appears on the TV screen, it means audio language is not available.

Camera Angles

DVD

Some DVD may contain scenes which have been shot simultaneously from various angles.You can change the camera angle if [ ] appears on the screen. If [ANGLE ICON] is set to [OFF] in [OTHERS] menu, [ ] will not appear. ➠ p.26.

1 During playback, press MODE repeatedly until [ ] appears.

2 Use ▲/▼ repeatedly until your desired camera angle appears.

1 / 8 (ANGLE)

angles can be varied on the displayed number

3 Press BACK to exit.

Black Level Setting

DVD

Adjust the black level to make the dark areas of the TV picture brighter.

1 During playback, press MODE repeatedly until [ ] appears.

2 Press ▲/▼ to adjust the black level.

ON	Makes the dark areas brighter.
OFF	Shows the original picture as recorded.

3 Press BACK to exit.

Note

• The setting will be kept even if the unit goes into standby mode.

Stereo Sound Mode

CD

This unit allows you to select a sound mode during CD playback.1 During playback, press AUDIO repeatedly until the desired sound mode appears.2 Each time you press AUDIO, the sound mode changes as follows.

		English	33
			INTRODUCTION
Note	Stereo sound with left and right channels.
STEREO
L-ch	Left channel sound only.
R-ch	Right channel sound only.

•Virtual surround cannot be changed when the sound mode is set to either [L-ch] or [R-ch].

Virtual Surround					PREPARATION
You can enjoy virtual surround on your 2 channel stereo
system.
1	During playback, press MODE repeatedly until [			]
					WATCHING
2	appears.
	Press ▲/▼ to select the sound level.
1			Natural effect.		TV
2			Emphasized effect.
OFF			No effects (original sound).
					USING
3	Press BACK to exit.
					FUNCTIONS
•	For audio CD, virtual surround will not be effective if the sound
Note
•	The setting will be kept even if the unit is turned off.
	mode is set to something other than [STEREO].
	[Stereo Sound Mode]. ➠ p.33
					DVDOPERATING
This feature allows you to assign a specific point on a disc to
•	Turn down the level or select [OFF] if the sound is distorted.
Marker Setup
be called back later.
To set a marker					CONNECTING
1	During playback, press MODE repeatedly until
2	[	]/[	] appears.		DEVICES
	Use ▲/▼ repeatedly until marker search menu appears.
3	Use ◄/► to select an available marker within 60 seconds.
4	When the playback reaches the point at which you want to				USEFUL
	set a marker, press ENTER.
5	• Marker is now set.				TIPS
	Press BACK to exit.
To return to the marker later
1	Repeat steps 1-2 in [To set a marker]. Use ◄/► to select				INFORMATION
2	the desired marker.
	Press ENTER at the desired marker to restart playback
	from the specific point which you set.
Note

•Marker search menu will disappear in about 60 seconds when there is no input.

•You can mark up to 10 points.

•To clear a marker, select the marker to be cleared, and then press

CLEAR.

•Ejecting the disc or turning off the power will erase all markers.

• Selecting [ ] at step 3 in the section [To set a marker] will also erase all markers.