USB Transmitter
(Part number 72468)
What comes with the transmitter?
•USB transmitter
•Remote control
•Easy Installation Guide
What does the USB Transmitter do?
By plugging the USB transmitter into a computer you can play audio from that device and have it output to the MLs.
How does the USB Transmitter work?
(1)Make sure the house code is set to the proper code (default is 0). If not, take the screwdriver provided and turn to the correct house code.
(2)Decide what source you want it to play. There is a sliding switch with 3 positions on the side of the transmitter. Slide it to S1, S2 or S3.
(3)Plug the USB into the proper port in a computer or similar device. If the computer is turned on, a red light indicator on the top side of the transmitter should light up.
(4)Make sure the MLs that you want to play are turned on (see ML
(5)Make sure the device (ie. computer) recognizes the transmitter. Once it does, start up your media player.
(6)Pick something with audio to play and start it. The light on the transmitter should begin to blink between red and blue as it searches for synchronization with the MLs.
(7)When synchronization is made, the light will be blue. The MLs will also have a blue light that will light up momentarily as it receives the signal. The MLs should begin playing. You can use your computer to set audio levels for the MLs. It should not be necessary to adjust bass, treble, etc., and you will want to remove any existing EQ or tone settings. If synchronization is not made, check your sources to make sure the MLs and the transmitter are set for the same source; your computer should not be set on mute. Be certain the MLs were not inadvertently muted from the remote control.
(8)You should now be able to control the ML volume with both the computer and the remote control. If you would like to use only one device to control audio volume, turn the volume to the highest settings on the device you do not want to use. This will give you full audio range. For instance, turning your computer vol- ume to 100% will allow the MusicLites remote to control volume for the full capability of the MLs and your computer.
15
