- 16 - EN
1C29
5Select the year
Press the Arrow button Kor L
until your desired year appears.
(Example: 2004)
Then press the Arrow button B.
6Select the hour
Press the Arrow button Kor L
until your desired hour appears.
(Example: 5, PM)
Then press the Arrow button B.
7Select the minute
Press the Arrow button Kor L
until the desired minute appears.
(Example: 40)
8Start the clock
Press the SETUPbutton on the
remote control.
Although seconds are not displayed,
they begin counting from 00 when
you press the SETUPbutton on the
remote control. Use this feature to synchronize the
clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 3 seconds, you may have to
reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1) Follow steps [1] to [2].
2) Select where you want to change using the Arrow
button B.
3) Enter correct numbers using the Arrow button K
or L.
4) Press the SETUP button on the remote control to
start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on
your cable system, select “AUTO CLOCK” and
press the ENTER button to turn [OFF] this function.
Then you can manually adjust the clock.
AUTOMATIC CLOCK SETTING
Make sure ...
•The unit is turned on.
•Confirm the unit is receiving a RF (Radio
Frequency) signal from either an antenna or cable
system connection using the ANT. terminal on the
rear of the unit.
NOTE:
•If a cable converter box is being used, make sure it
is powered on.
•You must use the remote control to perform the
clock setting procedure.
•If the unit is connected directly to a cable converter
box or satellite box, the local PBS station must be
selected on the cable box itself and the unit must
be set to the output channel of the cable converter
box or satellite box (usually channel 3 or 4), to be
able to set up or correct the clock automatically.
1Select “SETTING CLOCK”
Press the SETUPbutton on the
remote control.
Press the Arrow button Kor Lto
select “SETTING CLOCK”.
Press the ENTER button to enter
“SETTING CLOCK” menu.
2Set “AUTO CLOCK”to [ON]
Press the Arrow button Buntil
“AUTOCLOCK [ON]” appears.
3Begin “AUTO CLOCK CH SEARCH”
Press the Arrow button Lto select
“AUTO CLOCK CH SEARCH”.
Press the ENTER button.
•The unit is now searching for the
station which contain the auto
clock set signal. The search for a
signal may take up to 20
seconds per channel.
•“_ _” appears at the lower left of
the screen when the search has
ended.
•Auto Clock station- write down
the number(s) that appear on the
screen. These are the auto clock
station(s) in your area. See step [4] on page 17.
•If no number(s) appear on the TVscreen, there are
no stations in your area which contain the Auto
Clock signal. Auto Clock Setting is not possible.
Please use Manual Clock Setting on page 15.
Press the SETUPbutton to exit the screen.
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 THU 2 0 0 4
HOUR MINUTE
0 5 : – – PM
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 THU 2 0 0 4
HOUR MINUTE
0 5 : 4 0 PM
5:40 PM
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 THU 2 0 0 4
HOUR MINUTE
– – : – – – –
– SETTING CLOCK –
BAUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T. [OFF]
– SETTING CLOCK –
AUTO CLOCK [ON]
BAUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T. [OFF]
– AUTO CLOCK CH SEARCH –
08 10 13
_ _
- TV/VCR SETUP -
TIMER PROGRAMMING
BSETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH