- 19 - EN
1C29
TV OPERATION

DEGAUSSING

Magnetism from nearby appliances and speakers
might affect the color of the TVpicture.
If this happens, move this unit away from the appli-
ance. If the color is still not correct, unplug the power
cord, then plug it in again 30 minutes later or so.
TV/VCR

WATCHING A TV PROGRAM

1Turn on the unit
Press the POWER button to turn on the unit.
2Select the channel number
Press the CHANNELbutton Kor Lto select your
desired channel number or press the number on the
remote control.
Note for using the Number button on the remote
control:
¡You must precede single-digit channel numbers
with a zero (For example: 02, 03, 04 and so on).
¡When selecting cable channels which are higher
than 99, press +100 first, then press the last two
digits. (Example: to select channel 125, first press
“+100” then press “2” and “5”).
Remember: If the unit is connected to a cable box or
satellite box, the unit must be on CH3 or CH4, then
the channel to be viewed must be selected on the
cable box or satellite box.
3Adjust sound
Press the VOLUME button Kor L
to adjust the volume.
NOTES:
•If you press the CHANNELbutton Kor L in the
DVD mode, you can change the TVchannels.
Even if you turn off the unit in the DVD mode,
when you turn it on again, it will go into the
TV/VCR mode.
TV/VCR

PICTURE CONTROL

The TV/VCR/DVD’s picture controls – BRIGHT,