- 27 - EN
1C29
SPECIAL PLAYBACK
This function enables you to improve the picture
quality when playing back worn cassettes such as
rented tapes.
1Select “USER’S SET UP”
Press the SETUPbutton on the
remote control.
Press the Arrow button Kor Lto
point to “USER’S SET UP”.
Then press the ENTER button.
2Set “RENTAL”to [ON]
Press the Arrow button Kor Lto
point to “RENTAL”.
Press the ENTER button until [ON]
appears.
3Exit the Rental setting
Press the SETUPbutton on the remote control to
return to the TVmode.
4Start playback
Press the PLAYbutton to start playback. “RENTAL
PLAYB” appears.
•Once you select the Rental mode, it stays in effect
even after you turn off the unit.

TO CANCEL THE RENTALMODE

Repeat steps [1] to [2], select [OFF] using the
ENTER button on the remote control. Press the
SETUPbutton on the remote control to return to TV
mode.
If there is a powerfailure of any kind, the
tv/vcr/dvd will retain its memory forthis feature.
TV/VCR
Make sure ...
•The unit must be turned on.
•Insert a prerecorded tape.
RENTALPLAYBACK The unit has the auto repeat function that allows you
to repeat a tape indefinitely without touching the
PLAYbutton.
ALL REPEAT:Repeat playback from the beginning
to the end of the tape.
BLANK REPEAT: Repeat playback from the begin-
ning to a blank part, which is blank for more than
10 seconds.
1Select “USER’S SET UP”
Press the SETUPbutton on the
remote control.
Press the Arrow button Kor Lto
point to “USER’S SET UP”.
Then press the ENTER button.
2Select “ALL”or “BLANK”
Press the Arrow button Kor Lto
point to “REPEATPLAY”.
Press the ENTER button repeatedly
until your desired selection [ALL]
or [BLANK] appears.
3Exit the Repeat Play setting
Press the SETUPbutton on the remote control to
return to the TVmode.
4Start playback
Press the PLAYbutton to start the Repeat Play.
“REPEATPLAY B” appears.
•Once you selectu8 26.025 Tw 9 2dysepen repeatedlyefturn tfOnceev.29after025 T

•