- 17 - EN
1C29
DAYLIGHT-SAVING TIME
Select this feature and the unit’s clock automatically
will advance one hour in April, then reverse one hour
in October.
When Daylight-Saving Time is ON, the clock will
change automatically as follows:
•First Sunday of April :At 2 AM the clock imme-
diately changes to 3 AM. Any timer programming
you have set to occur between 2 AM and 3 AM
will not record.
•Last Sunday of October :At 2 AM the clock
immediately changes to 1 AM.
Make sure ...
•Press the POWER button to turn on the unit.
1Select “SETTING CLOCK”
Press the SETUPbutton on the
remote control.
Press the Arrow button Kor Lto
point to “SETTING CLOCK”.
Then press the ENTER button.
2Set “D.S.T.”(Daylight-Saving Time) to [ON]
Press the Arrow button Kor Lto
point to “D.S.T.”.
Then press the ENTER button until
[ON] appears.
3Exit the Daylight-Saving Time mode
Press the SETUPbutton on the remote control to
return to TVmode.

TO CANCEL THE DAYLIGHT-SAVING

TIME

Repeat steps [1] to [2], select [OFF] using the
ENTER button.
- TV/VCR SETUP -
TIMER PROGRAMMING
BSETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
BD.S.T. [ON]
NOTE: During Auto Clock CH Search, the picture
may be distorted, this is normal.
4Enter the channel number that contains the
Automatic Clock Setting Signal
Press the SETUPbutton on the remote control.
Press the Arrow button Kor Lto
select “SETTING CLOCK”.
Press the ENTER button to enter
“SETTING CLOCK” menu.
Press the Arrow button Lto select
“AUTO CLOCK CH”.
Press the ENTER button or the
Arrow button { or B