- 25 - EN
1C29
VIDEO CASSETTE

This TV/VCR/DVD will operate with any cassette that has the mark. For best results,

we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

REMOVING A CASSETTE

1)In the Stop mode, press the STOP/EJECT button
on the unit. The cassette will eject.
2)Pull the cassette out of the cassette compartment.
3)Store the cassette in its case as shown.
NOTE:
• In DVD mode, Whether the cassette is with tab or
without tab you insert, it doesn’t start playing until
you press the PLAYbutton.
In TV/VCR mode, if the cassette without tab is
inserted, playback will automatically start.

PRECAUTIONS

•Avoid moisture. Moisture condensation may occur
on the tape if it is moved from a cold place to a
warm place or visa versa. Before using a tape with
these conditions, to avoid damage of the tape and
your unit, wait until the tape has warmed to room
temperature and the moisture has evaporated.
•Avoid extreme heat, high humidity and magnetic
fields.
•Do not tamper with the cassette mechanism.
•Do not touch the tape with your fingers.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in
gently, but continuously, on the center-back of the
cassette until it is drawn into the unit. The unit will
automatically turn on.

TWO DIFFERENT TAPE SPEEDS

Before recording, select the tape speed from : SP
mode (Standard Play) or SLPmode (Super Long
Play).
The table below shows the maximum recording/play-
back time using T60, T120 or T160 tapes in each
mode.
Note:You can play back a tape recorded in LP mode
(Long Play).
Tape Speed Recording/Playback Time
Type of tape
T60 T120 T160
SPmode 1 hour 2 hours 2-2/3 hours
SLPmode 3 hours 6 hours 8 hours

ERASE PREVENTION

You can prevent accidental
erasing of recording by
breaking off the tab on the
back edge of the cassette.
If you decide to record on
the tape again, cover the
hole with plastic tape.
CORRECT
Window
WRONG
Tab
Plastic Tape