- 24 - EN
1C29
SELECTING THE MTS SYSTEM
Make sure ...
•The unit must be turned on.

TO SELECT HIFI MODE

1Select “USER’S SET UP”
Press the SETUPbutton on the
remote control.
Press the Arrow button Kor Lto
point to “USER’S SET UP”. Then
press the ENTER button.
2Select“VCR AUDIO”
Press the Arrow button Kor Lto
point to“VCR AUDIO”.
3 Select [HIFI]
Press the ENTER button until
[HIFI] appears.
4To return to TV mode
Press the SETUPbutton on the remote control to
return to TVmode.
NOTES:
•Normally “HIFI” should be selected for playback
with HIFI sound.
• When you play non-HIFI tapes, the unit will play
automatically in the monaural mode.
•The unit records automatically MTS broadcasts in
HIFI stereo sound unless you select SAPmode
recording before you begin recording.

TO SELECT STEREO, SAP, OR MONO

1Select “USER’S SET UP”
Press the SETUPbutton on the
remote control.
Press the Arrow button Kor Lto
point to “USER’S SET UP”.
2Select “TV AUDIO”
Press the Arrow button Kor Lto
point to“TVAUDIO”.
3Select [STEREO],[SAP], or [MONO]
Press the ENTER button until [STEREO], [SAP], or
[MONO] appears.
4To return to TV mode
Press the SETUPbutton on the remote control to
return to TVmode.
NOTES:
•You must select the recording mode,either TV
AUDIO [STEREO] or [SAP] when you record a
broadcast.
Refer to “MTS RECORDING/MONITOR
MODE”.
•If you select second audio when second audio is
not available, the TV/VCR/DVD will record nor-
mal audio.
•The unit records automatically MTS broadcasts in
HIFI stereo sound unless you select SAPmode
recording before you begin recording.
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
BUSER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
BUSER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– USER’S SET UP –
RENTAL [OFF]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
BVCR AUDIO [HIFI]
TV AUDIO [STEREO]
– USER’S SET UP –
RENTAL [OFF]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
VCR AUDIO [HIFI]
BTV AUDIO [STEREO]
– USER’S SET UP –
RENTAL [OFF]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
BVCR AUDIO [HIFI]
TV AUDIO [STEREO]

TO SELECT MONO MODE

You can change the selection to “MONO” if you
want to listen to HIFI tapes in normal audio play-
back.
1)
Press the SETUPbutton on the remote control.
Press the Arrow button Kor Lto point to “USER’S
SET UP”. Then press the ENTER button.
2) Press the Arrow button Kor Lto point to
“VCR AUDIO”.
3) Press the ENTER button until [MONO] appears.
4) Press the SETUPbutton on the remote control to
return to TVmode.
TV/VCR