NOTE:
When unplugging the AC cord or if there is a power failure for more than 30 seconds, you may have to reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock, 1)Follow steps [1] and [2].
1Select “CHANNEL SET UP”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L but- ton to point to “CHANNEL SET UP”.
Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK
BCHANNEL SET UP USER’S SET UP
TIME SEARCH INDEX SEARCH
2)Select where you want to change using the F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or STOP/L button.
2 Select “ADD/DELETE CH” | – CHANNEL SET UP – |
Press the PLAY/K or STOP/L but- B ADD / DELETE CH (TV)
4)Press the MENU button on the remote control to start the clock.
PLEASE NOTE:
ton to point to “ADD/DELETE CH”.
Press the F.FWD/B button.
AUTO PRESET
If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.
CHANNEL SET UP AGAIN
Make sure ...
3Enter the desired channel number
Press the PLAY/K or STOP/L but- ton until your desired channel num- ber appears. (You can also use the number buttons or the CHANNEL K/L button to enter it.) (Example: CH8)
08
ADD / DELETE
•Press the POWER button to turn on the TV/VCR.
4Delete (or add) it from (into) memory
1Select “CHANNEL SET UP”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L but- ton to point to “CHANNEL SET UP”.
Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK
BCHANNEL SET UP USER’S SET UP
TIME SEARCH INDEX SEARCH
Press the F.FWD/B or REW/s button. The channel number changes to light red. The channel is deleted from memory.
•To delete another channel, repeat steps [3] and [4].
•If you press the F.FWD/B or REW/s button again, the channel is memorized again.
Added channel: Light blue.
Deleted channel: Light red.
2Begin auto preset
Press the PLAY/K or STOP/L but- ton to point to “AUTO PRESET”. Then, press the F.FWD/B button. The tuner scans and memorizes all the active channels in your area.
– CHANNEL SET UP –
ADD / DELETE CH (TV)
BAUTO PRESET
5Exit the channel setup mode
Press the MENU button on the remote control to returns to TV mode.
NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL K or L button.
SELECTING THE LANGUAGE
3After scanning
The tuner stops on the lowest memorized channel.
DELETING (OR ADDING)
CHANNEL
The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)
Make sure ...
•Press the POWER button to turn on the TV/VCR. NOTE: This function effects only the language on the screen menu and not the audio source.
1 Select “LANGUAGE” | – M E N U – | |
Press the MENU button on the | TIMER PROGRAMMING | |
PICTURE CONTROL | ||
SETTING CLOCK | ||
remote control. | CHANNEL SET UP | |
| USER’S SET UP | |
Press the PLAY/K or STOP/L but- | B LANGUAGE [ENGLISH] | |
ZERO RETURN | ||
| CAPTION [OFF] | |
ton to point to “LANGUAGE”. | TIME SEARCH | |
INDEX SEARCH | ||
|
- 13 - | EN |
8H30
