- 19 - EN
8H30
NOTES:
•Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time.
•This function will not operate in recording mode.
In the example below: To watch a program that is 2
hours, 50 minutes from the present tape position, in
either direction.
1Insert a tape.
2Select “TIME SEARCH” mode
Press the TIME SEARCH button (with each push it
will increase by 10 minute).
3Enter your desired time
Press the PLAY/Kor STOP/Lbut-
ton until your desired time appears.
(Example: “2:50” stands for 2 hours
50 minutes)
If you wish to cancel the Time Search at this point,
press the MENU button on the remote control.
4Begin Time Search
By pressing the REW/sor F.FWD/Bbutton, the
TV/VCR will rewind or fast forward to the specified
point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.

TO CANCEL THE TIME SEARCH at this

point

Press the STOP/EJECTbutton on the TV/VCR or the
remote control. This will delete the selected time.
TIME SEARCH
2 : 50
This function enables you to improve the picture
quality when playing back worn cassettes such as
rented tapes.
1Select “USER’S SET UP”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to “USER’S SET UP”.
Then, press the F.FWD/Bbutton.
2Set “RENTAL”to [ON]
Press the PLAY/Kor STOP/Lbut-
ton to point to “RENTAL”.
Press the F.FWD/Bor REW/s
button until [ON] appears.
3Exit the Rental setting
Press the MENU button on the remote control to
return to the TVmode.
4Start playback
Press the PLAYbutton to start playback. “RENTAL
PLAYB” appears.
•Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.

TO CANCEL THE RENTALMODE

Repeat steps [1] and [2], select [OFF] using the
F.FWD/Bor REW/sbutton on the remote control.
Press the MENU button on the remote control to
return to TVmode.
If there is a powerfailure of any kind, the unit
will retain its memory forthis feature.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
BUSER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– USER’S SET UP–
BRENTAL [ON]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
RENTALPLAYBACK

INDEX SEARCH

An index signal is recorded on the tape automatically
when the recording is started. To view a recording at a
specific start point:
1)Press the MENU button on the
remote control. Press the
PLAY/Kor STOP/Lbutton to
point to “INDEX SEARCH”,
then press the F.FWD/Bbutton.
2)Press the PLAY/Kor STOP/Lbutton within 30
seconds until the number of programs that you
want to skip appears.
3)Press the F.FWD/Bor REW/sbutton to start
index search. If you want to go forward, press the
F.FWD/Bbutton. If you want to go back, press
the REW/sbutton.
•After index search, the TV/VCR will play the tape
automatically.
•In some cases, the index mark at the beginning of
video tape cannot be detected.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
BINDEX SEARCH
SLOW MOTION
Press the SLOW button to reduce the playback speed.
The TV/VCR mutes the sound during slow motion.
Press the PLAYbutton to return to normal playback.
NOTE: If left in the Slow mode for more than five
minutes, the TV/VCR will automatically go into the
Stop mode.