OTR (One Touch Recording)
This function enables you to set the recording length simply by pressing the REC/OTR button on the VCR.
1)Begin OTR by pressing the | OTR(2 : 30) |
REC/OTR button on the VCR |
|
repeatedly until the desired |
|
recording length appears. |
|
Recording stops when 0:00 is | SP |
reached. |
|
NOTES:
•This function CANNOT be done from the remote control.
•To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control.
•If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediate- ly, eject the tape and turn itself off.
Push(es) | Display | Recording length |
1 push |
| (continuous recording) |
2 pushes | 0:30 | 30 minutes |
3 pushes | 1:00 | 60 minutes |
4 pushes | 1:30 | 90 minutes |
|
|
|
17 pushes | 8:00 | 480 minutes |
TIMER RECORDING
You may set the TV/VCR to start and end a record- ing while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE:July 6th, 2001
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
Make sure ...
•If your TV/VCR is connected to a cable or satellite box, you must set the TV/VCR to channel 3 or 4 to match the output channel of the box.
•Clock is set to the correct time and date before set- ting the timer.
•TV/VCR power is turned on to program it.
•To insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
•To set the channel you want to record
AAvoid overlap of programs ...
There is a chance that a program will not be record- ed. When programs overlap:
•The program with the earliest start time will record first.
•Once the earliest program finishes recording, the overlapping programs will record in the order of the program number.
•The illustration below demonstrates the sequence of recording.
Recording Sequence
Program 1
9:00AM | 10:00AM | 11:00AM | 12:00PM |
*Recording period is SHADED
1Select “TIMER PROGRAMMING”
Press the MENU button on the | – M E N U – |
remote control. | B TIMER PROGRAMMING |
PICTURE CONTROL | |
Confirm “TIMER PROGRAM- | SETTING CLOCK |
CHANNEL SET UP | |
USER’S SET UP | |
MING” is pointed to by pressing | |
CAPTION [OFF] | |
| LANGUAGE [ENGLISH] |
the PLAY/K button. | ZERO RETURN |
TIME SEARCH | |
Press the F.FWD/B button. | INDEX SEARCH |
|
•If you have not yet set the clock, “MANUAL CLOCK SET” appears. If so, follow stops [3] to [8] on page 11. Then set the timer recording.
2Select your desired program position (1~8)
Press the PLAY/K or STOP/L | – TIMER PROGRAMMING – | ||||
button to select the desired pro- | CH DATE | BEGIN END | |||
- - | |||||
gram position. | |||||
- - | |||||
| - - | ||||
Then, press the F.FWD/B button. | B - - | ||||
- - | |||||
| - - | ||||
| - - | ||||
| - - | ||||
3Set the channel number
Press the PLAY/K or STOP/L button until the desired channel number appears.
(Example: CH61) | – TIMER PROGRAMMING – | ||||
CH DATE | BEGIN END | ||||
Then, press the F.FWD/B button. | - - | ||||
- - | |||||
- - | |||||
Remember: | |||||
B 61 | |||||
- - | |||||
If your TV/VCR is connected to a | - - | ||||
- - | |||||
- - | |||||
| |||||
cable or satellite box, you must set
the TV/VCR to channel 3 or 4 to match the output channel of the box.
4Select once, every day or weekly recording
For once recording :
– TIMER PROGRAMMING –
Press the PLAY/K (up) button | CH DATE | BEGIN END | ||
until the desired date appears. | - - | |||
- - | ||||
(Example: “7/06” for July 6th). | - - | |||
- - | ||||
| B 61 | 7/06 FRI | ||
Then, press the F.FWD/B but- | - - | |||
- - | ||||
| - - | |||
ton.
- 21 - | EN |
8H30
