- 18 - EN
9I03

PICTURE SEARCH

This feature is very useful in finding or skipping over
a particular scene on a tape. In this mode, the sound
will be muted.
1)You may view a video tape at a high speed in
either a forward or reverse direction by pressing
the F.FWD or REWbutton during playback (in the
SP/ LP / SLP modes).
2)Press it again and the TV/VCR will now search in
super high speed (in the LP/ SLP modes only).
NOTE: Tapes recorded in the SPor LP mode will
display a noise bar on the TVscreen and the pic-
ture may revert to Black and White. This is normal.
3)Press the PLAYbutton to return to normal speed.
SEARCH

ZERO RETURN

This function allows you to search easily a beginning
point that you want to review by rewinding or fast
forwarding.
NOTE:
Zero Return WILL NOTwork on a blank tape or a
blank portion of a tape.
1Stop a tape at your desired point
Rewind or fast forward the tape to the beginning
point from which you want to review.
2Reset the counter to 0:00:00
Press the COUNTER RESET button repeatedly.
3Begin recording or playback
Press the RECORD or PLAYbutton.
Press the STOPbutton when recording or playback is
completed.
4To activate “ZERO RETURN”mode
Press the MENU button on the remote control.
Press the PLAY/Kor STOP/Lbutton to point to
“ZERO RETURN”.
Then, press the F.FWD/Bbutton.
The counter will appear on the TV
screen.
The tape will automatically stop
when the counter returns to 0:00:00.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
BTIME SEARCH
INDEX SEARCH

TIME SEARCH

The Time Search function makes it possible to
quickly advance the tape to your desired position
simply by entering the exact amount of playback
time you want to skip.
The TV/VCR has an auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAYbutton.
ALL REPEAT:Repeat playback from the beginning
to the end of the tape.
BLANK REPEAT: Repeat playback from the begin-
ning to a blank part of more than 10 seconds.
1Select “USER’S SET UP”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to “USER’S SET UP”.
Then, press the F.FWD/Bbutton.
2Select “ALL”or “BLANK”
Press the PLAY/Kor STOP/Lbut-
ton to point to “REPEATPLAY”.
Press the F.FWD/Bor REW/s
button repeatedly until your desired
selection [ALL] or [BLANK]
appears.
3Exit the Repeat Play setting
Press the MENU button on the remote control to
return to the TVmode.
4Start playback
Press the PLAYbutton to start the Repeat Play.
”REPEATPLAY B” appears.
•Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR.
•If the Rental mode is set [ON], the “RENTAL
PLAYB” display has priority.

TO CANCEL THE REPEAT PLAY MODE

Repeat steps [1] and [2], select [OFF] using the
F.FWD/Bor REW/sbutton on the remote control.
Press the MENU button on the remote control to
return to TVmode.
If there is a powerfailure of any kind, the unit
will retain its memory forthis feature.
AUTO REPEATPLAYBACK
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
BUSER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– USER’S SET UP–
RENTAL [OFF]
BREPEAT PLAY [ALL]
AUTO RETURN [OFF]
T5215 _VA 01.2.21 7:13 PM Page 18