- 19 - EN
1K09
STILL PICTURE
You can view a still picture on the TVscreen during
playback (the Still mode). Press the PAUSE/STILL
button during playback. Only tapes recorded in the
SLPmode will show the least amount of lines.Press
the PLAYbutton to return to playback.
NOTES:
•Usually there will be video “noise” lines (black
and white streaks or dots) on the screen. This is
normal.
If the tape was originally recorded in SPor LP
mode, the still picture will be black and white in
addition to the “noise” lines.
This is not a fault of the machine, but is a limi-
tation of a TV/VCR with 2 video heads.
•If it is left in the Pause mode for more than five
minutes, the TV/VCR will automatically switch to
the Stop mode.
PICTURE CONTROLS

TRACKING ADJUSTMENT

•Tracking adjustment will be set automatically
(Digital Tracking function) when you start play-
back.
•However when playing pre-recorded tapes or tapes
recorded on units other than your own, noise lines
(black and white streaks) may appear on the play-
back picture. If this occurs, you can adjust the
tracking control manually by pressing the CHAN-
NELKor Lbutton until the streaks disappear. To
return to the DTR function, stop the tape once and
start playback again.

NOISE CANCEL (in the Still mode)

This feature allows you to reposition or reduce the
noise lines of a still picture. Press the PAUSE/STILL
button so that the noise lines change position on the
screen so you can see the picture in its entirety with-
out distracting noise lines.
NOTE: This feature can be activated ONLYwhen
viewing a tape recorded in the SLPmode. If the tape
was originally recorded in the SPor LP mode, the
still picture may revert to black and white in addition
to the “noise bars”. This is normal.

VERTICAL HOLD CONTROL

In the Pause/Still mode only, when the picture begins
to vibrate vertically, stabilize the picture by pressing
the CHANNELKor Lbutton.
NOTE:
If there are video noise lines on the screen, reposition
or reduce them. Refer to “NOISE CANCEL”.

RENTALPLAYBACK

This function enables you to improve the picture
quality when playing back worn cassettes such as
rented tapes.
1Select “USER’S SET UP”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to “USER’S SET UP”.
Then, press the F.FWD/Bbutton.
2Set “RENTAL”to [ON]
Press the PLAY/Kor STOP/Lbut-
ton to point to “RENTAL”.
Press the F.FWD/Bor REW/s
button until [ON] appears.
3Exit the Rental setting
Press the MENU button on the remote control to
return to the TVmode.
4Start playback
Press the PLAYbutton to start playback. “RENTAL
PLAYB” appears.
•Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.

TO CANCEL THE RENTALMODE

Repeat steps [1] and [2], select [OFF] using the
F.FWD/Bor REW/sbutton on the remote control.
Press the MENU button on the remote control to
return to TVmode.
If there is a powerfailure of any kind, the unit
will retain its memory forthis feature.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
BUSER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– USER’S SET UP–
BRENTAL [ON]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
4Begin Time Search
By pressing the REW/sor F.FWD/Bbutton, the
TV/VCR will rewind or fast forward to the specified
point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.

TO CANCEL THE TIME SEARCH at

this point

Press the STOP/EJECTbutton on the TV/VCR or
the remote control. This will delete the selected
time.
T5407UH/7408UJ.QX33 03.1.8 4:14 PM Page 19