RECORDING
TWO DIFFERENT TAPE SPEEDS | ERASE PREVENTION |
Before recording, select the tape speed from : SP mode (Standard Play) or SLP mode (Super Long Play).
The table below shows the maximum recording/play- back time using T60, T120 or T160 tapes in each mode.
You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette.
Tab |
Tape Speed | Recording/Playback Time | |||
| Type of tape | T60 | T120 | T160 |
|
|
|
|
|
SP mode | 1 hour | 2 hours | ||
|
|
|
|
|
SLP mode | 3 hours | 6 hours | 8 hours | |
|
|
|
|
|
Note: You can play back a tape recorded in LP mode (Long Play).
Make sure ...
If you decide to record on the tape again, cover the hole with plastic tape.
Transparent Tape
•TV/VCR power must be turned on.
•Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
NOTE: This unit will ONLY record and view the same channel.
NORMAL RECORDING
SKIPPING UNWANTED
SCENES DURING RECORDING
You can ONLY watch the same TV program that is being recorded.
Press the PAUSE/STILL button to temporarily stop recording.
PAUSE
1Select the channel to be recorded
Press the number buttons on the | CH 10 |
remote control or the CHANNEL |
|
Kor L button.
Remember: If the TV/VCR is con- nected to a cable box or satellite
box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box.
Press the PAUSE/STILL or RECORD button to resume record-
ing.SP
NOTES:
•After five minutes, the TV/VCR will automatically switch to the Recording mode to prevent tape damage.
•If “CLOSED CAPTION (ON)” is selected, the On- Screen Display will appear for 5 seconds, then dis- appear.
2Select the tape speed
Press the SPEED button to select the desired tape speed (SP/ SLP).
SP
OTR (One Touch Recording)
This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR.
3Begin recording
Press the RECORD button.
REC
Make sure ...
•TV/VCR power must be turned on.
•Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
SP
NOTES:
•
4 Stop recording |
| • | |
Press the STOP button when recording is completed. | |||
| |||
|
| • | |
| - 20 - | ||
This function CANNOT be done from the remote control.
Recording starts immediately when the REC/OTR button is pressed.
When the REC/OTR button is pressed 18 times, the TV/VCR returns to the Normal Recording mode.
EN
